Question:
The numerical technique used to solve simultaneous equations is
The numerical technique used to solve simultaneous equations is
Show Hint
Gauss elimination is a direct method for solving systems of equations efficiently.
Updated On: Feb 7, 2025
- Newton's method
- Regression method
- Intersection method
- Gauss Elimination method
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Gauss Elimination method is a standard numerical technique for solving simultaneous linear equations by systematically reducing the system to upper triangular form.
Was this answer helpful?
0
0
Top Questions on Chemical Kinetics
- In the reaction \( 2A + B \rightarrow C \), if the rate law is \( \text{Rate} = k[A]^2[B] \), what is the overall order of the reaction?
- JEE Main - 2025
- Chemistry
- Chemical Kinetics
- In 2-chloro-3,4-dimethylhexane, how many chiral carbon atoms are present?
- MHT CET - 2024
- Chemistry
- Chemical Kinetics
- The major contributor of carbon monoxide is
- TANCET - 2024
- Basic Engineering and Science
- Chemical Kinetics
What mass of 75% pure CaCO3 will be required to neutralize 50 ml of 0.5M HCL solution according to the following reaction? \[ {CaCO}_3 + 2{HCl} \to {CaCl}_2 + {CO}_2 + {H}_2{O} \]
- TANCET - 2024
- Basic Engineering and Science
- Chemical Kinetics
A gaseous reaction \( A \to 2B + C \) takes place isothermally in a constant pressure reactor. Starting with a gaseous mixture containing 50% A (rest inerts), the ratio of final to initial volume is found to be 1.6. The percentage conversion of A is
- TANCET - 2024
- Basic Engineering and Science
- Chemical Kinetics
View More Questions
Questions Asked in TANCET exam
- The centrifugal force (N) acting on a material mass 2g present at the tip of a beater of radius 25 cm rotating at 600 rpm is
- TANCET - 2024
- Yarn Engineering
- Select the correct match
- TANCET - 2024
- Yarn Engineering
- Two yarns of count X each are doubled and plied. The ratio of resultant count of two ply yarn expressed in tex system and Ne system is_______. Neglect contraction due to twist.
- TANCET - 2024
- Yarn Engineering
- A reed has 15 dents/cm, and the warp is drawn in two ends per dent. If the finished fabric is 1.4 m wide compared with 1.47 m wide in the reed, what is the finished fabric sett?
- TANCET - 2024
- Fabric Engineering
- Among the following systems of drafting, the objective of which is to reduce the friction between adjacent warp ends?
- TANCET - 2024
- Fabric Engineering
View More Questions