>
Exams
>
Civil Engineering
>
Reinforced Concrete Beams
>
the minimum size of the reinforcement bar in rcc c
Question:
The minimum size of the reinforcement bar in RCC column is ___
Show Hint
For minimum reinforcement sizes, always refer to the relevant building codes and standards that define the minimum dimensions for bars in columns.
AP PGECET - 2024
AP PGECET
Updated On:
May 3, 2025
8 mm
6 mm
12 mm
10 mm
Hide Solution
Verified By Collegedunia
The Correct Option is
B
Solution and Explanation
In RCC columns, the minimum size of the reinforcement bar is usually 6 mm. This is a standard value in the design of reinforced concrete columns for ensuring adequate structural strength. Hence, the correct answer is 6 mm.
Download Solution in PDF
Was this answer helpful?
0
0
Top Questions on Reinforced Concrete Beams
A singly reinforced rectangular concrete beam has a width of 200 mm and an effective depth of 300 mm. If the critical neutral axis depth coefficient is 0.48, then the limiting value of the moment of resistance of the beam will be close to: (Use M-20 grade of concrete and Fe-415 steel)
CUET (PG) - 2025
Civil Structural and Transport Engineering
Reinforced Concrete Beams
View Solution
The effective length of a column of length \(L\), held in position and restrained in direction at one end, and the other end effectively restrained in direction but not held in position, is equal to
AP PGECET - 2025
Civil Engineering
Reinforced Concrete Beams
View Solution
Which of the following statements best explains why shear reinforcement (stirrups) is provided in reinforced concrete beams?
AP PGECET - 2025
Civil Engineering
Reinforced Concrete Beams
View Solution
How much percentage of average bond stress is increased for reinforced bars subjected to compression?
AP PGECET - 2025
Civil Engineering
Reinforced Concrete Beams
View Solution
As per IS: 456-1978, if \( L \) is the short span of slab, what would be the minimum total thickness of slab in order to meet the slab stiffness criteria?
AP PGECET - 2025
Civil Engineering
Reinforced Concrete Beams
View Solution
View More Questions
Questions Asked in AP PGECET exam
The absolute humidity of air at 101.325 kPa is measured to be 0.02 kg of water per kg of dry air. Then the partial pressure of water vapour in the air is:
AP PGECET - 2025
Thermodynamics
View Solution
If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase is known, then the latent heat of fusion can be calculated by the:
AP PGECET - 2025
Thermodynamics
View Solution
1 mole of Argon gas is heated at constant pressure from 200 K to 600 K.
If \( C_p = 4\ \text{cal} \cdot \text{deg}^{-1} \cdot \text{mol}^{-1} \), then the change in entropy will be:
(Given \( \ln 3 = 1.09 \))
AP PGECET - 2025
Thermodynamics
View Solution
The minimum amount of work required to operate a refrigerator which removes 1000 Cal heat at $0^\circ$C and rejects at $50^\circ$C will be:
AP PGECET - 2025
Thermodynamics
View Solution
The entropy of single crystalline Silicon at absolute zero will be:
AP PGECET - 2025
Thermodynamics
View Solution
View More Questions