Question:
The fatigue limit of metals is decreased by
The fatigue limit of metals is decreased by
Show Hint
Decarburizing is commonly performed during heat treatment to improve surface properties, but it can reduce the overall strength of the material.
Updated On: May 5, 2025
- Carburizing
- Nitriding
- Carbonitriding
- Decarburizing
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Decarburizing decreases the fatigue limit of metals by reducing the carbon content, which weakens the material and makes it more susceptible to fatigue failure.
Was this answer helpful?
0
0
Top Questions on Heat Treatment Processes
- In precipitation hardenable alloy, like duralumin, intermediate precipitates can form due to:
- TS PGECET - 2024
- Metallurgical Engineering
- Heat Treatment Processes
- Identify the element which increases the Ms temperature of a steel containing 1.0% C:
- TS PGECET - 2024
- Metallurgical Engineering
- Heat Treatment Processes
- Stepped quenching process is also called as:
- TS PGECET - 2024
- Metallurgical Engineering
- Heat Treatment Processes
- Grossman’s critical diameter method is adopted to determine:
- TS PGECET - 2024
- Metallurgical Engineering
- Heat Treatment Processes
- Nitriding of the steel is done at low temperatures because:
- TS PGECET - 2024
- Metallurgical Engineering
- Heat Treatment Processes
View More Questions
Questions Asked in AP PGECET exam
- The absolute humidity of air at 101.325 kPa is measured to be 0.02 kg of water per kg of dry air. Then the partial pressure of water vapour in the air is:
- AP PGECET - 2025
- Thermodynamics
- If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase is known, then the latent heat of fusion can be calculated by the:
- AP PGECET - 2025
- Thermodynamics
- 1 mole of Argon gas is heated at constant pressure from 200 K to 600 K.
If \( C_p = 4\ \text{cal} \cdot \text{deg}^{-1} \cdot \text{mol}^{-1} \), then the change in entropy will be:
(Given \( \ln 3 = 1.09 \))
- AP PGECET - 2025
- Thermodynamics
- The minimum amount of work required to operate a refrigerator which removes 1000 Cal heat at $0^\circ$C and rejects at $50^\circ$C will be:
- AP PGECET - 2025
- Thermodynamics
- The entropy of single crystalline Silicon at absolute zero will be:
- AP PGECET - 2025
- Thermodynamics
View More Questions