Question:
The current gain of a common base transistor circuit is 0.96. On changing the emitter current by 10.0 mA, the change in the base current will be
The current gain of a common base transistor circuit is 0.96. On changing the emitter current by 10.0 mA, the change in the base current will be
Updated On: Jun 2, 2024
- 9.6 mA
- 0.4 mA
- 19.6 mA
- 24 mA
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Current gain for common base transistor
$ \, \, \, \, \, \, \alpha=\bigg(\frac{\Delta I_C}{\Delta I_E}\bigg)_{V_C}$
Given, $ \, \, \, \, \, \, \, \, \alpha=0.96 , \Delta I_E =10.0mA$
$ \, \, \, \, \, \, \, \, \, \, 0.96=\frac{\Delta I_C}{10.0}$
$ \, \, \, \, \, \, \, \, \, \, \Delta I_C =0.96 \times 10.0 =9.6 mA$
$ \, \, \, \, \, \, \alpha=\bigg(\frac{\Delta I_C}{\Delta I_E}\bigg)_{V_C}$
Given, $ \, \, \, \, \, \, \, \, \alpha=0.96 , \Delta I_E =10.0mA$
$ \, \, \, \, \, \, \, \, \, \, 0.96=\frac{\Delta I_C}{10.0}$
$ \, \, \, \, \, \, \, \, \, \, \Delta I_C =0.96 \times 10.0 =9.6 mA$
Was this answer helpful?
0
0
Top Questions on Transistors
- The typical biasing of a silicon transistor is shown in the figure.
The value of the common-emitter current gain \( \beta \) for the transistor is 100. Ignore reverse saturation current. The output voltage \( V_o \) (in V) is ____ (in integer).- GATE PH - 2024
- Physics
- Transistors
- Given below are two statements :
Statement I : In a typical transistor, all three regions emitter, base and collector have same doping level.
Statement II : In a transistor, collector is the thickest and base is the thinnest segment.
In the light of the above statements, choose the most appropriate answer from the options given below.- JEE Main - 2023
- Physics
- Transistors
- In an n-p-n common emitter (CE) transistor the collector current changes from 5 m A to 16 mA for the change in base current from 100 μ A and 200 μA , respectively. The current gain of transistor is Options 1. 110 2. 0.9 3. 210 4. 9
- JEE Main - 2023
- Physics
- Transistors
- The purpose of a coupling capacitor in a transistor amplifier is to___
- CUET (PG) - 2023
- Physics
- Transistors
- If the power and current gains of a transistor amplifier are 16500 and 100 respectively, then voltage gain is___
- CUET (PG) - 2023
- Physics
- Transistors
View More Questions
Questions Asked in JKCET exam
- A moving block having mass $m$, collides with another stationary block having mass $4\,m$. The lighter block comes to rest after collision. When the initial velocity of the lighter block is $v$, then the value of coefficient of restitution (e) will be
- JKCET - 2019
- work, energy and power
- A force $ F = 3x^2 + 2x + 1 $ acts on a body in the $ x $ -direction. The work done by this force during a displacement from $ x = -1 $ to $ +1 $ is
- JKCET - 2019
- work, energy and power
- What is the colour of the flame on heating potassium in the flame of a Bunsen burner?
- JKCET - 2019
- GROUP 1 ELEMENTS
- If $ a $ , $ b $ , $ c $ are the lengths of three edges of unit cell, $ \alpha $ is the angle between side $ b $ and $ c $ , $ \beta $ is the angle between side $ a $ and $ c $ and $ \gamma $ is the angle between side $ a $ and $ b $ , what is the Bravais Lattice dimensions of a tetragonal crystal?
- JKCET - 2019
- The solid state
- Which of the following compounds is known as copper glance?
- JKCET - 2019
- General Principles and Processes of Isolation of Elements
View More Questions
Concepts Used:
Transistors
Transistor
A transistor is a type of semiconductor device that can be used to both conduct and insulate electric current or voltage. A transistor basically acts as a switch and an amplifier. In simple words, we can say that a transistor is a miniature device that is used to control or regulate the flow of electronic signals.
Parts of a Transistor:
A transistor is a combination of three terminals made of semiconducting materials that help in making a connection to an external circuit and allow current to flow. The three terminals are:
- Base: The base activates the transistor. It is thin and lightly doped. It is put in the centre of the transistor.
- Emitter: The emitter is the negative terminal of the transistor. It is heavily doped and is moderately sized.
- Collector: The collector is the negative terminal of the transistor. It is located on the right side of a transistor and is moderately doped. It is larger than the emitter.
Read More: Difference Between NPN and PNP Transistor
Types of Transistors:
A transistor is a type of electronic device which is formed by p-type and n-type semiconductors.
NPN Transistor
- NPN transistor is a type of Bipolar Junction Transistor.
- In this, electrons are major current carriers, and minor ones are holes.
- Their arrangement is in such a way that N-type doped semiconductors are separated by the layer of P-type doped semiconductors which is a thin layer of material embedded between them.
- Emitter Current = Collector Current + Base Current
PNP Transistor
- PNP transistor is also a type of Bipolar Junction Transistor.
- In these, holes are the major source that carries current, and electrons are minor.
- Their arrangement is in a way that P-type doped semiconductor is separated by N-type doped semiconductor material which is a thin layer.
- Emitter Current = Collector Current + Base Current
Read More: Characteristics of a Transistor
Configurations of a Transistor:
Using the three types of configuration can be used to design any transistor circuit. The three types of configuration of a transistor are:
- Common Emitter Transistor
- Common Base Transistor
- Common Collector Transistor
Common Emitter (CE) Configuration of a Transistor
In Common Emitter Configuration, the transistor’s emitter terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Base-Emitter voltage (VBE) when Collector-Emitter voltage (VCE) is held constant.
- Rin = ΔVBE/ΔIB | VCE = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
- Rout = ΔVCE/ΔIC | IB = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the base current (IB) when the collector-emitter voltage (VCE) is constant.
- α = ΔIC/ΔIB | VCB = Constant
Common Base (CB) Configuration of a Transistor
In Common Base Configuration, the transistor’s base terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IE) with Base-Emitter voltage (VBE) when the Collector Base voltage (VCB) is held constant.
- Rin = ΔVBE/ΔIE | VCB = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Base voltage (VCB) when the emitter current (IE) is held constant.
- Rout = ΔVCB/ΔIB | IE = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the emitter current (IE) when the Collector Base voltage (VCB) is constant.
- α = ΔIC/ΔIE | VCB = Constant
Common Collector Configuration of a Transistor
In Common Collector Configuration, the transistor’s collector terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Collector-Base voltage (VCB) when the Collector Base voltage (VCB) is held constant.
Output Characteristics
- Variation of emitter current (IE) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
Current Transfer Characteristics
- The variation of the collector current (IE) with the base current (IB) when the Collector-Emitter voltage (VCE) is constant.