List of practice Questions

"The emissive power of a black body varies linearly to the fourth power of its absolute temperature" This statement is called:
Match list I with list II and select the correct answer using the code given:
Investment casting
Nose radius is expressed in:
In which of the following welding methods is the Heat affected zone (HAZ) minimum?
Consider the following statements about non-conventional machining processes: 
i. Hard materials can be easily machined without being damaged 
ii. Complex shapes are easily produced 
iii. They have low specific energy consumption 
iv. Tools need not be harder than work piece
Match list I with list II and select the correct answer using the code given:
Quick return mechanism
Match list I with list II and select the correct answer using the code given:
Interpolations
What is the angle between the steering axis and the vertical when viewed from the side of the vehicle?
The following diverts the power at right angles towards the driving wheels:
Transfer case is used in a:
Wheel alignment servicing equipment is used to measure:
Which type of rear axle is used in heavy vehicles?
In a modern final drive, the type of gearing used for the drive pinion and ring gear is:
What is the maximum power transmitted by a single plate clutch at speed of 3600 rev/min if the coefficient of friction is 0.4 and the linings have a radius of 160mm inner and 190mm outer? The total spring force is 2.5 kN.
What is gear ratio of second year if Gear ratio of first and third gears are 4 and 1.55?
In a fluid coupling, power is transferred due to:
Janney transmission is working as per _________ principle.
The vehicle having a passenger cabin with two rows of seats and integrated cargo space, accessed from behind by a single tail gate is:
As per AIS 052, School Bus are come under the TYPE
Solar radiation is increased inside the passenger compartment by increasing __________ of a car.
In a wind tunnel, the honeycomb has a longer length that reduces the ______ velocity components of the flow with minimal pressure drop in the stream wise direction.
When there is a reduction in amplitude over every cycle of vibration, then the body is said to have
Outer part of the tyre that extends from the bead to the tread is
The rolling resistance does not depend upon
Which of the following is the longitudinal framing of the roof at the joining?