Question:
Match the following:
The correct answer is:
Match the following:
The correct answer is:
Show Hint
Polymerization reactions involve the combination of monomers, often creating polymers with distinct physical properties.
Updated On: May 2, 2025
- A-II; B-III; C-I; D-IV
- A-III; B-IV; C-II; D-I
- A-III; B-IV; C-I; D-II
- A-III; B-I; C-IV; D-II
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Let's analyze each monomer and match it with the correct polymer:
A. CF2=CF2 (Tetrafluoroethylene) is the monomer used to produce Teflon.
B. NH2(CH2)6NH2 (Hexamethylenediamine) and HO2C(CH2)4CO2H (Adipic acid) are the monomers used to produce Nylon 6,6.
C. C6H5OH (Phenol) and HCHO (Formaldehyde) are the monomers used to produce Bakelite.
D. CH2=CH(Cl)-CH=CH2 (Chloroprene) is the monomer used to produce Neoprene.
Therefore, the correct matching is:
A. CF2=CF2 (Tetrafluoroethylene) is the monomer used to produce Teflon.
B. NH2(CH2)6NH2 (Hexamethylenediamine) and HO2C(CH2)4CO2H (Adipic acid) are the monomers used to produce Nylon 6,6.
C. C6H5OH (Phenol) and HCHO (Formaldehyde) are the monomers used to produce Bakelite.
D. CH2=CH(Cl)-CH=CH2 (Chloroprene) is the monomer used to produce Neoprene.
Therefore, the correct matching is:
- A - III (Teflon)
- B - IV (Nylon 6,6)
- C - II (Bakelite)
- D - I (Neoprene)
Was this answer helpful?
1
0
Top Questions on Polymers
- A polymer melt being extruded through a spinneret hole of circular cross-section exhibits a die-swell ratio of 2.2. The extrusion velocity and volumetric flow rate during this extrusion process are 20 m/min and \(2.6 \times 10^{-8}\) m\(^3\)/s, respectively. The maximum diameter (mm) of the extruded melt after exit from the spinneret hole (rounded off to 2 decimal places) is:
- Determine the correctness or otherwise of the following Assertion [p] and Reason [r].
[p]: The tenacity of a polymeric fibre depends on the strain rate
[r]: Under mechanical deformation polymeric fibre exhibits both elastic as well as viscous response - Amongst the following, the exothermic transition(s) is/are:
- The fibre forming polymer which contains aromatic group in the main chain is:
- The fibre which does NOT contain 1,4-glycosidic bonds is
View More Questions
Questions Asked in TS EAMCET exam
- If the sum of two vectors is a unit vector, then the magnitude of their difference is:
- The molecular weight of a gas is 32. If 0.5 moles of the gas occupy 22.4 liters at standard temperature and pressure (STP), what is the density of the gas?
- TS EAMCET - 2025
- Gas laws
- Which of the following forces have infinite range?
- TS EAMCET - 2025
- laws of motion
- A rod has length \( L \). The linear mass density is \( 2x \, \text{kg/m} \), where \( x \) is the distance from the left end. The center of mass of the rod from the left end lies at a distance of
- TS EAMCET - 2025
- Particle Motion
- A ball is projected vertically up with speed \( V_0 \) from a certain height \( H \). When the ball reaches the ground, the speed is \( 3V_0 \). The time taken by the ball to reach the ground and height \( H \) respectively are:
- TS EAMCET - 2025
- projectile motion
View More Questions