Match List I with List II: List - I List - II A. Torque I. kg m-1 s-2 B. Energy Density II. kg ms-1 C. Pressure gradient III. kg m-2 s-2 D. Impulse IV. kg m2 s-2
Choose the correct answer from the options given below :
| List - I | List - II | ||
| A. | Torque | I. | kg m-1 s-2 |
| B. | Energy Density | II. | kg ms-1 |
| C. | Pressure gradient | III. | kg m-2 s-2 |
| D. | Impulse | IV. | kg m2 s-2 |
- A-IV, B-I, C-III, D-II
- A-I, B-IV, C-III, D-II
- A-IV, B-III, C-I, D-II
- A-IV, B-I, C-II, D-III
The Correct Option is A
Solution and Explanation
The correct answer is (A) : A-IV, B-I, C-III, D-II
A: Torque ⇒ IV : kg m2 s-2
B: Energy density ⇒ I : kg m-1 s-2
C: Pressure gradient ⇒ III : kg m-2 s-2
D: Impulse ⇒ II : kg ms-1
Top Questions on Units and measurement
- A person measures mass of 3 different particles as 435.42 g, 226.3 g and 0.125 g. According to the rules for arithmetic operations with significant figures, the additions of the masses of 3 particles will be.
- JEE Main - 2025
- Physics
- Units and measurement
- A car travels at a speed of $ 72 \, \text{km/h} $. What is the car's speed in meters per second?
- MHT CET - 2025
- Physics
- Units and measurement
- The mass of an object is measured as \( (28 \pm 0.01) \) g and its volume as \( (5 \pm 0.1) \) cm\(^3\). What is the percentage error in density?
- MHT CET - 2025
- Physics
- Units and measurement
Mass = \( (28 \pm 0.01) \, \text{g} \), Volume = \( (5 \pm 0.1) \, \text{cm}^3 \). What is the percentage error in density?
- MHT CET - 2025
- Physics
- Units and measurement
- A tiny metallic rectangular sheet has length and breadth of 5 mm and 2.5 mm, respectively. Using a specially designed screw gauge which has pitch of 0.75 mm and 15 divisions in the circular scale, you are asked to find the area of the sheet. In this measurement, the maximum fractional error will be \( \frac{x}{100} \), where \( x \) is:
- JEE Main - 2025
- Physics
- Units and measurement
Questions Asked in JEE Main exam
In the following circuit, the reading of the ammeter will be: (Take Zener breakdown voltage = 4 V)
- JEE Main - 2025
- Zener Diodes
If $10 \sin^4 \theta + 15 \cos^4 \theta = 6$, then the value of $\frac{27 \csc^6 \theta + 8 \sec^6 \theta}{16 \sec^8 \theta}$ is:
- JEE Main - 2025
- Trigonometric Identities
If the area of the region $\{ (x, y) : |x - 5| \leq y \leq 4\sqrt{x} \}$ is $A$, then $3A$ is equal to
- JEE Main - 2025
- Area between Two Curves
Let $A = \begin{bmatrix} \cos \theta & 0 & -\sin \theta \\ 0 & 1 & 0 \\ \sin \theta & 0 & \cos \theta \end{bmatrix}$. If for some $\theta \in (0, \pi)$, $A^2 = A^T$, then the sum of the diagonal elements of the matrix $(A + I)^3 + (A - I)^3 - 6A$ is equal to
- JEE Main - 2025
- Matrices
Let $A = \{ z \in \mathbb{C} : |z - 2 - i| = 3 \}$, $B = \{ z \in \mathbb{C} : \text{Re}(z - iz) = 2 \}$, and $S = A \cap B$. Then $\sum_{z \in S} |z|^2$ is equal to
- JEE Main - 2025
- Determinants
Concepts Used:
Units and Measurement
Unit:
A unit of a physical quantity is an arbitrarily chosen standard that is broadly acknowledged by the society and in terms of which other quantities of similar nature may be measured.
Measurement:
The process of measurement is basically a comparison process. To measure a physical quantity, we have to find out how many times a standard amount of that physical quantity is present in the quantity being measured. The number thus obtained is known as the magnitude and the standard chosen is called the unit of the physical quantity.
Read More: Fundamental and Derived Units of Measurement
System of Units:
- CGS system
- FPS system
- MKS system
- SI units
Types of Units:
Fundamental Units -
The units defined for the fundamental quantities are called fundamental units.
Derived Units -
The units of all other physical quantities which are derived from the fundamental units are called the derived units.