Question:
Match List I with List II.
List I: (a) Caprolactum (b) 2-Chloro-1,3-butadiene (c) Isoprene (d) Acrylonitrile.
List II: (i) Natural rubber (ii) Buna-N (iii) Nylon 6 (iv) Neoprene.
Match List I with List II.
List I: (a) Caprolactum (b) 2-Chloro-1,3-butadiene (c) Isoprene (d) Acrylonitrile.
List II: (i) Natural rubber (ii) Buna-N (iii) Nylon 6 (iv) Neoprene.
List I: (a) Caprolactum (b) 2-Chloro-1,3-butadiene (c) Isoprene (d) Acrylonitrile.
List II: (i) Natural rubber (ii) Buna-N (iii) Nylon 6 (iv) Neoprene.
Show Hint
Nylon 6 is named because its monomer (caprolactum) contains 6 carbon atoms.
Updated On: Jan 9, 2026
- (a)→(i), (b)→(ii), (c)→(iii), (d)→(iv)
- (a) → (iv), (b) → (iii), (c) → (ii), (d) → (i)
- (a) → (ii), (b) → (i), (c) → (iv), (d) → (iii)
- (a)→(iii), (b)→(iv), (c)→(i), (d)→(ii)
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Step 1: Caprolactum is the monomer for Nylon 6.
Step 2: 2-Chloro-1,3-butadiene (chloroprene) is the monomer for Neoprene.
Step 3: Isoprene is the monomer for Natural rubber.
Step 4: Acrylonitrile is a component of Buna-N.
Step 2: 2-Chloro-1,3-butadiene (chloroprene) is the monomer for Neoprene.
Step 3: Isoprene is the monomer for Natural rubber.
Step 4: Acrylonitrile is a component of Buna-N.
Was this answer helpful?
0
0
Top Questions on Polymers
- A polymer melt being extruded through a spinneret hole of circular cross-section exhibits a die-swell ratio of 2.2. The extrusion velocity and volumetric flow rate during this extrusion process are 20 m/min and \(2.6 \times 10^{-8}\) m\(^3\)/s, respectively. The maximum diameter (mm) of the extruded melt after exit from the spinneret hole (rounded off to 2 decimal places) is:
- The main constituent of vinegar is:
- The monomer of natural rubber is:
- The catalyst used in the preparation of high density polythene is
- Arrange the following polymers in increasing order of intermolecular forces:
View More Questions
Questions Asked in JEE Main exam
Let \( ABC \) be a triangle. Consider four points \( p_1, p_2, p_3, p_4 \) on the side \( AB \), five points \( p_5, p_6, p_7, p_8, p_9 \) on the side \( BC \), and four points \( p_{10}, p_{11}, p_{12}, p_{13} \) on the side \( AC \). None of these points is a vertex of the triangle \( ABC \). Then the total number of pentagons that can be formed by taking all the vertices from the points \( p_1, p_2, \ldots, p_{13} \) is ___________.
- JEE Main - 2026
- Coordinate Geometry
- A voltage regulating circuit consisting of a Zener diode having breakdown voltage of $10\,\text{V}$ and maximum power dissipation of $0.4\,\text{W}$ is operated at $15\,\text{V}$. The approximate value of protective resistance in this circuit is ___ $\Omega$.
- JEE Main - 2026
- Semiconductor electronics: materials, devices and simple circuits
- Two point charges of \(1\,\text{nC}\) and \(2\,\text{nC}\) are placed at two corners of an equilateral triangle of side \(3\) cm. The work done in bringing a charge of \(3\,\text{nC}\) from infinity to the third corner of the triangle is ________ \(\mu\text{J}\). \[ \left(\frac{1}{4\pi\varepsilon_0}=9\times10^9\,\text{N m}^2\text{C}^{-2}\right) \]
- JEE Main - 2026
- Electrostatics
Consider the following two reactions A and B:
The numerical value of [molar mass of $x$ + molar mass of $y$] is ___.
- JEE Main - 2026
- Organic Chemistry
Consider an A.P. $a_1,a_2,\ldots,a_n$; $a_1>0$. If $a_2-a_1=-\dfrac{3}{4}$, $a_n=\dfrac{1}{4}a_1$, and \[ \sum_{i=1}^{n} a_i=\frac{525}{2}, \] then $\sum_{i=1}^{17} a_i$ is equal to
- JEE Main - 2026
- Arithmetic Progression
View More Questions