Question:
Let f(z) be an analytic function, where z = x + iy. If the real part of f(z) is cosh x cos y, and the imaginary part of f(z) is zero for y = 0, then f(z) is
Let f(z) be an analytic function, where z = x + iy. If the real part of f(z) is cosh x cos y, and the imaginary part of f(z) is zero for y = 0, then f(z) is
Updated On: Jul 28, 2025
- cosh x exp (-iy)
- cosh z exp z
- cosh z cos y
- cosh z
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The correct option is (D): cosh z
Was this answer helpful?
0
4
Top Questions on Analytic functions
- If \(u = x^2 - y^2\) is real part of an analytic function f(z), then f(z) is:
- CUET (PG) - 2023
- Mathematics
- Analytic functions
- Match List I with List II
LIST I LIST II A. \(f(z)=z^3\) I. Not analytic any where B. \(f(z)=\frac{1}{z}\) II. Analytic at Z = 0 only C. \(f(z)=\bar z\) III. Analytic everywhere D. \(f(z)=z\bar z\) IV. Not analytic at Z = 0 Choose the correct answer from the options given below:- CUET (PG) - 2023
- Mathematics
- Analytic functions
- If\(ƒ(x + iy) = x^3 − 3.xy^2 + ¡\Psi(x,y) \space where \space i= \sqrt{-1}\) and ƒ (x+iy) is an analytic function, then \(\Psi (x, y)\) is:
- CUET (PG) - 2023
- Mathematics
- Analytic functions
- Given below are two statements
Statement I: If f(z) = u + iv is an analytic function, then u and v are both harmonic function.
Statement II: If f (z) is analytic within and on a closed curve C, and if a is any point within C, then \(f(a)=\frac{1}{2πi}\int_c\frac{f(z)}{z-a}dz\)
In the light of the above statements, choose the most appropriate answer from the options given below- CUET (PG) - 2023
- Mathematics
- Analytic functions
Questions Asked in GATE Metallurgy exam
- At the instant when OP is vertical and AP is horizontal, the link OD is rotating counter clockwise at a constant rate w=7rad/s. Pin P on link OD slides in the slot BC of link ABC which is hinged at A, and causes a clockwise rotation of the link ABC. The magnitude of angular velocity of link ABC for this instant is _____rad/s (rounded off to 2 decimal places).
- GATE Metallurgy - 2024
- Principles of the design of machine elements such as bolted, riveted and welded joints
- In an arc welding process, the voltage and current are 30V and 200A, respectively. The cross-sectional area of the joint is 20 mm2 and the welding speed is 5mm/s. The heat required to melt the material is 20 J/s. The percentage of heat lost to the surrounding during the welding process is ____(rounded off to 2 decimal places).
- GATE Metallurgy - 2024
- Principles of welding, brazing, soldering and adhesive bonding
- Steady, compressible flow of air takes place through an adiabatic converging- diverging nozzle, as shown in the figure. For a particular value of pressure difference across the nozzle, a stationary normal shock wave forms in the diverging section of the nozzle. If E and F denote the flow conditions just upstream and downstream of the normal shock, respectively, which of the following statement(s) is/are TRUE?
- GATE Metallurgy - 2024
- Basics of compressible fluid flow
- A set of jobs U, V, W, X, Y, Z arrive at time t = 0 to a production line consisting of two workstations in series. Each job must be processed by both workstations in sequence (i.e., the first followed by the second). The process times (in minutes) for each job on each workstation in the production line are given below.
Job U V W X Y Z Workstation 1 5 7 3 4 6 8 Workstation 2 4 6 6 8 5 7
The sequence in which the jobs must be processed by the production line if the total makespan of production is to be minimized is- GATE Metallurgy - 2024
- Principles of non-traditional machining processes
- A ram in the form of a rectangular body of size l=9m and b=2m is suspended by two parallel ropes of lengths 7m. Assume the center-of-mass of the body is at its geometric center and g = 9.81m/s2. For striking the object P with a horizontal velocity of 5m/s, what is the angle θ with the vertical from which the ram should be released from rest?
- GATE Metallurgy - 2024
- Forces on submerged bodies
View More Questions