Question:
Lateral ties in RC columns are provided to resist ___
Lateral ties in RC columns are provided to resist ___
Show Hint
In RC column design, lateral ties are critical to prevent buckling of longitudinal bars under axial loads, ensuring the overall stability of the column.
Updated On: May 3, 2025
- Bending moment
- Shear
- Buckling of longitudinal steel bars
- Both bending moment and shear
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Lateral ties in reinforced concrete (RC) columns are primarily provided to prevent the buckling of longitudinal steel bars. These ties help to maintain the stability of the column and prevent lateral displacement under axial load. Hence, the correct answer is "Buckling of longitudinal steel bars".
Was this answer helpful?
0
0
Top Questions on Reinforced Concrete Beams
- Maximum longitudinal reinforcement in columns shall not exceed ___
- AP PGECET - 2024
- Civil Engineering
- Reinforced Concrete Beams
- In a simply supported reinforced concrete beam, the reinforcement is placed ___\ to the neutral axis.
- AP PGECET - 2024
- Civil Engineering
- Reinforced Concrete Beams
- The section in which concrete is not fully stressed to its maximum permissible value while steel reaches its maximum value, is called ___
- AP PGECET - 2024
- Civil Engineering
- Reinforced Concrete Beams
- In a beam, the transverse reinforcement is provided at ___ to the span of the slab.
- AP PGECET - 2024
- Civil Engineering
- Reinforced Concrete Beams
- The minimum size of the reinforcement bar in RCC column is ___
- AP PGECET - 2024
- Civil Engineering
- Reinforced Concrete Beams
View More Questions
Questions Asked in AP PGECET exam
The rank of matrix \(\begin{bmatrix} k & -1 & 0 \\[0.3em] 0 & k & -1 \\[0.3em] -1 & 0 & k \end{bmatrix}\) is 2, for \( k = \)
- AP PGECET - 2024
- Rank of a Matrix
If \(A = \begin{bmatrix} 4 & 2 \\[0.3em] -3 & 3 \end{bmatrix}\), then \(A^{-1} =\)
- AP PGECET - 2024
- Inverse of a Matrix
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- AP PGECET - 2024
- Two Port Networks
An induction motor when started on load does not accelerate up to full speed but runs at \({\frac {1}{17}}\)th of the rated speed. The motor is said to be:
- AP PGECET - 2024
- Induction Motor
A 0 to 30 V voltmeter has an error of \(\pm 2\%\) of FSD. What is the range of readings if the voltage is 30V?
- AP PGECET - 2024
- Errors in Measurement
View More Questions