In the given circuit a charge of 900 C is delivered to the 100 V source in a minute. The value of $V_1$ must be _______.
Step 1: Use Q = It.
Given: $Q = 900$ C, $t = 60$ s
$\Rightarrow I = \frac{Q}{t} = \frac{900}{60} = 15$ A
Step 2: Use KVL in the loop.
Voltage across 20 $\Omega$ resistor = $IR = 15 \times 20 = 300$ V
$V_1 = 300 + 80 + 100 = 480$? No, wait. The original 100V is delivering charge. Correct KVL: $V_1 = 300 + 80 - 60 = 320$ V
Conclusion: $V_1 = 320$ V
The circuit shown in figure is
For the circuit shown in the figure, the delay of the bubbled NAND gate is 5 ns and that of the counter is assumed to be zero. If the clock (Clk) frequency is 12 MHz, then the counter behaves as a ________.
The circuit shown in the figure can be used as a ________.
If diode cut-in voltage is 0.6 V. The diode status are
For a two-port network to be reciprocal, it is necessary that ……..