Question:
In polymer Buna-S : 'S' stands for :
In polymer Buna-S : 'S' stands for :
Show Hint
Buna-N is a similar copolymer where 'N' stands for {Acrylonitrile}. Both are types of synthetic rubber.
Updated On: Jan 21, 2026
- Sulphur
- Strength
- Styrene
- Sulphonation
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Step 1: Buna-S is a copolymer.
Step 2: Bu stands for 1,3-Butadiene.
Step 3: Na stands for Sodium (the catalyst used in polymerization).
Step 4: S stands for Styrene.
Step 2: Bu stands for 1,3-Butadiene.
Step 3: Na stands for Sodium (the catalyst used in polymerization).
Step 4: S stands for Styrene.
Was this answer helpful?
0
0
Top Questions on Polymers
- A polymer melt being extruded through a spinneret hole of circular cross-section exhibits a die-swell ratio of 2.2. The extrusion velocity and volumetric flow rate during this extrusion process are 20 m/min and \(2.6 \times 10^{-8}\) m\(^3\)/s, respectively. The maximum diameter (mm) of the extruded melt after exit from the spinneret hole (rounded off to 2 decimal places) is:
- The main constituent of vinegar is:
- The monomer of natural rubber is:
- The catalyst used in the preparation of high density polythene is
- Arrange the following polymers in increasing order of intermolecular forces:
View More Questions
Questions Asked in JEE Main exam
- For two chemical reactions A and B, if the difference between their activation energy is 20 kJ at 300 K (R = 8.3 J K\(^{-1}\) mol\(^{-1}\)), determine \(\dfrac{k_2}{k_1}\).
- JEE Main - 2026
- Chemical Kinetics
- Consider a first order reaction: \[ A \rightarrow \text{products} \] 3 different solutions are taken and the rate of reaction of: Solution 1: 100 mL 10M \( A \) \( \rightarrow r_1 \) Solution 2: 200 mL 10M \( A \) \( \rightarrow r_2 \) Solution 3: 100 mL 10M \( A \) + 100 mL water \( \rightarrow r_3 \) The correct order of the rates of reactions is,
- JEE Main - 2026
- Chemical Kinetics
- Given at $10 \text{ AM}$, reaction is started (i) $A \xrightarrow{k} \text{Product}$ ($1^{\text{st}}$ order reaction) (ii) $BrO_3^- + 5Br^- \rightarrow 3Br_2$. At $10:10 \text{ AM}$, rate of disappearance of $Br^-$ was $2 \times 10^{-3} \text{ M/min}$ and concentration of $A$ was $0.1 \text{ M}$, if both reactions were proceed with same rate at this time then value of $k$ will be ?
- JEE Main - 2026
- Chemical Kinetics
- For given zero order reaction AB $\longrightarrow$ A$_2$ + B$_2$, the graph is given for decomposition of [AB]. Find half-life (t$_{1/2}$) in minutes?
- JEE Main - 2026
- Chemical Kinetics
Find temperature (in Kelvin) at which rate constant are equal for the following reaction?
\(\text{A $\rightarrow$ B, K = 10$^4$ e$^{-24000/T}$} \)
\(\text{P $\rightarrow$ Q, K = 10$^6$ e$^{-30000/T}$} \)- JEE Main - 2026
- Chemical Kinetics
View More Questions