Question:
In ___\ bending, the direction of the neutral axis will not be perpendicular to the plane of bending.
In ___\ bending, the direction of the neutral axis will not be perpendicular to the plane of bending.
Show Hint
In unsymmetrical bending, be sure to consider the distribution of stress and strain along different axes of the section.
Updated On: May 3, 2025
- Upward
- Downward
- Symmetrical
- Unsymmetrical
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
In unsymmetrical bending, the bending is such that the neutral axis does not remain perpendicular to the plane of bending. This occurs because the cross-section has different moments of inertia about different axes. The neutral axis will rotate, making an angle with the plane of bending. Hence, the correct answer is "Unsymmetrical".
Was this answer helpful?
0
0
Top Questions on Shear Stress and Bending Stress
- What is the ratio of maximum shear stress to average shear stress for a circular section
- CUET (PG) - 2023
- Strength of Materials
- Shear Stress and Bending Stress
- Match List I with List II
LIST I LIST II A. Shear centre I. Tension B. Principal plane II. slope C. Fixed end III. Shear stress D. Middle third Rule IV. Twisting Choose the most appropriate answer from the options given below:
- CUET (PG) - 2023
- Strength of Materials
- Shear Stress and Bending Stress
Questions Asked in AP PGECET exam
The rank of matrix \(\begin{bmatrix} k & -1 & 0 \\[0.3em] 0 & k & -1 \\[0.3em] -1 & 0 & k \end{bmatrix}\) is 2, for \( k = \)
- AP PGECET - 2024
- Rank of a Matrix
If \(A = \begin{bmatrix} 4 & 2 \\[0.3em] -3 & 3 \end{bmatrix}\), then \(A^{-1} =\)
- AP PGECET - 2024
- Inverse of a Matrix
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- AP PGECET - 2024
- Two Port Networks
An induction motor when started on load does not accelerate up to full speed but runs at \({\frac {1}{17}}\)th of the rated speed. The motor is said to be:
- AP PGECET - 2024
- Induction Motor
A 0 to 30 V voltmeter has an error of \(\pm 2\%\) of FSD. What is the range of readings if the voltage is 30V?
- AP PGECET - 2024
- Errors in Measurement
View More Questions