Question:
How is lumped hydrologic flow routing of a flood, where flow is calculated as a function of time alone, called?
How is lumped hydrologic flow routing of a flood, where flow is calculated as a function of time alone, called?
Show Hint
Lumped routing is simple and used when spatial variations are negligible.
Updated On: Feb 7, 2025
- Distributed Routing
- Lumped Routing
- Hydraulic Routing
- Dynamic Wave Routing
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Step 1: Understanding Flow Routing Methods
- Lumped routing considers only time variations. - Distributed routing accounts for spatial variations. - Hydraulic routing includes fluid mechanics principles. - Dynamic wave routing considers unsteady flow effects.
Step 2: Conclusion
Lumped routing is correct because it calculates flow as a function of time only.
- Lumped routing considers only time variations. - Distributed routing accounts for spatial variations. - Hydraulic routing includes fluid mechanics principles. - Dynamic wave routing considers unsteady flow effects.
Step 2: Conclusion
Lumped routing is correct because it calculates flow as a function of time only.
Was this answer helpful?
0
0
Top Questions on Hydrology
- Which of the following is NOT a recording rain gauge?
- In the downstream of spillways, hydraulic jump occurs mainly to:
The hydraulic efficiency of an impulse turbine is maximum when the velocity is …………. of the jet velocity.
- Transmissibility of a confined aquifer having its thickness 15 m and permeability \( 8 \times 10^{-4} \) m/s is given by:
- An isochrone is a line on the basin map joining the points
View More Questions
Questions Asked in TANCET exam
- The centrifugal force (N) acting on a material mass 2g present at the tip of a beater of radius 25 cm rotating at 600 rpm is
- TANCET - 2024
- Yarn Engineering
- Select the correct match
- TANCET - 2024
- Yarn Engineering
- Two yarns of count X each are doubled and plied. The ratio of resultant count of two ply yarn expressed in tex system and Ne system is_______. Neglect contraction due to twist.
- TANCET - 2024
- Yarn Engineering
- A reed has 15 dents/cm, and the warp is drawn in two ends per dent. If the finished fabric is 1.4 m wide compared with 1.47 m wide in the reed, what is the finished fabric sett?
- TANCET - 2024
- Fabric Engineering
- Among the following systems of drafting, the objective of which is to reduce the friction between adjacent warp ends?
- TANCET - 2024
- Fabric Engineering
View More Questions