For a transistor \(\frac{I_C}{I_E}\)= 0.96, then the current gain for the common emitter configuration
For a transistor \(\frac{I_C}{I_E}\)= 0.96, then the current gain for the common emitter configuration
- 12
- 6
- 48
- 24
The Correct Option is D
Solution and Explanation
The correct option is (D) : 24
\(\beta=\frac{\alpha}{1-\alpha}\) = 24
Top Questions on Semiconductor electronics: materials, devices and simple circuits
The graph shows the variation of current with voltage for a p-n junction diode. Estimate the dynamic resistance of the diode at \( V = -0.6 \) V.
- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- In an n-type semiconductor, electron-hole combination is a continuous process at room temperature. Yet the electron concentration is always greater than the hole concentration in it. Explain.
- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Two statements are given one labelled Assertion (A) and the other labelled Reason (R). Select the correct answer from the codes (A), (B), (C) and (D) as given below.
Assertion (A): A hole is an apparent free particle with effective positive electronic charge.
Reason (R): A hole is not necessarily a vacancy left behind by an electron in the valence band.- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
In the given circuit, the equivalent resistance between points A and D is:
- UPCATET - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- If an 18 $\Omega$ resistance wire is bent into the shape of an equilateral triangle, then the equivalent resistance across the ends of any side = ?
- UPCATET - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Questions Asked in NEET exam
Which of the following microbes is NOT involved in the preparation of household products?
A. \(\textit{Aspergillus niger}\)
B. \(\textit{Lactobacillus}\)
C. \(\textit{Trichoderma polysporum}\)
D. \(\textit{Saccharomyces cerevisiae}\)
E. \(\textit{Propionibacterium sharmanii}\)- NEET (UG) - 2025
- Microbiology
A sphere of radius R is cut from a larger solid sphere of radius 2R as shown in the figure. The ratio of the moment of inertia of the smaller sphere to that of the rest part of the sphere about the Y-axis is :
- NEET (UG) - 2025
- Moment Of Inertia
Predict the major product $ P $ in the following sequence of reactions:
(i) HBr, benzoyl peroxide
(ii) KCN
(iii) Na(Hg), $C_{2}H_{5}OH$- NEET (UG) - 2025
- Organic Chemistry
AB is a part of an electrical circuit (see figure). The potential difference \(V_A - V_B\), at the instant when current \(i = 2\) A and is increasing at a rate of 1 amp/second is:
- NEET (UG) - 2025
- Electromagnetic Induction and Inductance
- A wire of resistance \(R\) is cut into 8 equal pieces. From these pieces, two equivalent resistances are made by adding four of these together in parallel. Then these two are added in series. The net effective resistance of the combination is:
- NEET (UG) - 2025
- Resistance
Concepts Used:
Transistors
Transistor
A transistor is a type of semiconductor device that can be used to both conduct and insulate electric current or voltage. A transistor basically acts as a switch and an amplifier. In simple words, we can say that a transistor is a miniature device that is used to control or regulate the flow of electronic signals.
Parts of a Transistor:
A transistor is a combination of three terminals made of semiconducting materials that help in making a connection to an external circuit and allow current to flow. The three terminals are:
- Base: The base activates the transistor. It is thin and lightly doped. It is put in the centre of the transistor.
- Emitter: The emitter is the negative terminal of the transistor. It is heavily doped and is moderately sized.
- Collector: The collector is the negative terminal of the transistor. It is located on the right side of a transistor and is moderately doped. It is larger than the emitter.
Read More: Difference Between NPN and PNP Transistor
Types of Transistors:
A transistor is a type of electronic device which is formed by p-type and n-type semiconductors.
NPN Transistor
- NPN transistor is a type of Bipolar Junction Transistor.
- In this, electrons are major current carriers, and minor ones are holes.
- Their arrangement is in such a way that N-type doped semiconductors are separated by the layer of P-type doped semiconductors which is a thin layer of material embedded between them.
- Emitter Current = Collector Current + Base Current
PNP Transistor
- PNP transistor is also a type of Bipolar Junction Transistor.
- In these, holes are the major source that carries current, and electrons are minor.
- Their arrangement is in a way that P-type doped semiconductor is separated by N-type doped semiconductor material which is a thin layer.
- Emitter Current = Collector Current + Base Current
Read More: Characteristics of a Transistor
Configurations of a Transistor:
Using the three types of configuration can be used to design any transistor circuit. The three types of configuration of a transistor are:
- Common Emitter Transistor
- Common Base Transistor
- Common Collector Transistor
Common Emitter (CE) Configuration of a Transistor
In Common Emitter Configuration, the transistor’s emitter terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Base-Emitter voltage (VBE) when Collector-Emitter voltage (VCE) is held constant.
- Rin = ΔVBE/ΔIB | VCE = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
- Rout = ΔVCE/ΔIC | IB = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the base current (IB) when the collector-emitter voltage (VCE) is constant.
- α = ΔIC/ΔIB | VCB = Constant
Common Base (CB) Configuration of a Transistor
In Common Base Configuration, the transistor’s base terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IE) with Base-Emitter voltage (VBE) when the Collector Base voltage (VCB) is held constant.
- Rin = ΔVBE/ΔIE | VCB = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Base voltage (VCB) when the emitter current (IE) is held constant.
- Rout = ΔVCB/ΔIB | IE = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the emitter current (IE) when the Collector Base voltage (VCB) is constant.
- α = ΔIC/ΔIE | VCB = Constant
Common Collector Configuration of a Transistor
In Common Collector Configuration, the transistor’s collector terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Collector-Base voltage (VCB) when the Collector Base voltage (VCB) is held constant.
Output Characteristics
- Variation of emitter current (IE) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
Current Transfer Characteristics
- The variation of the collector current (IE) with the base current (IB) when the Collector-Emitter voltage (VCE) is constant.