Question:
For a single frequency value, the most sensitive detector is:
For a single frequency value, the most sensitive detector is:
Show Hint
Tuned detectors are the most sensitive when detecting a specific frequency, as they are designed to resonate at that frequency.
Updated On: May 4, 2025
- Vibration galvanometer
- Tuned detector
- Headphone
- Oscillator
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
A tuned detector is the most sensitive for detecting a single frequency value because it is specifically tuned to resonate at the frequency of interest, providing the highest sensitivity for that particular frequency.
Thus, the correct answer is Tuned detector.
Was this answer helpful?
0
0
Top Questions on Instrumentation
- In a CRT the magnitude of the beam current can be adjusted by a front panel control marked:
- AP PGECET - 2024
- Electrical Engineering
- Instrumentation
- In general, fluid friction damping is not employed in indicating instruments although one can find its use in:
- AP PGECET - 2024
- Electrical Engineering
- Instrumentation
- What is the frequency range for a headphone as a detector?
- AP PGECET - 2024
- Electrical Engineering
- Instrumentation
- Calculate the value of LSB and MSB of a 12-bit DAC for 10V.
- Four identical alternators each rated for 20 MVA, 11 kV having a sub-transient reactance of 16% are working in parallel. The short circuit level at the bus bars is:
- TANCET - 2024
- Electrical Engineering
- Instrumentation
View More Questions
Questions Asked in AP PGECET exam
The rank of matrix \(\begin{bmatrix} k & -1 & 0 \\[0.3em] 0 & k & -1 \\[0.3em] -1 & 0 & k \end{bmatrix}\) is 2, for \( k = \)
- AP PGECET - 2024
- Rank of a Matrix
If \(A = \begin{bmatrix} 4 & 2 \\[0.3em] -3 & 3 \end{bmatrix}\), then \(A^{-1} =\)
- AP PGECET - 2024
- Inverse of a Matrix
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- AP PGECET - 2024
- Two Port Networks
An induction motor when started on load does not accelerate up to full speed but runs at \({\frac {1}{17}}\)th of the rated speed. The motor is said to be:
- AP PGECET - 2024
- Induction Motor
A 0 to 30 V voltmeter has an error of \(\pm 2\%\) of FSD. What is the range of readings if the voltage is 30V?
- AP PGECET - 2024
- Errors in Measurement
View More Questions