Question:
Find the diameter of the punch, if the diameter of the blank is 20mm( blinking operation is going on). Given the clearance value is 0.04mm
Find the diameter of the punch, if the diameter of the blank is 20mm( blinking operation is going on). Given the clearance value is 0.04mm
Updated On: Oct 15, 2024
Hide Solution
Verified By Collegedunia
Correct Answer: 20
Solution and Explanation
The correct answer is 20 mm.
Was this answer helpful?
0
1
Top Questions on Metal forming processes
- A cutting tool provides a tool life of 60 minutes while machining with the cutting speed of 60 m/min. When the same tool is used for machining the same material, it provides a tool life of 10 minutes for a cutting speed of 100 m/min. If the cutting speed is changed to 80 m/min for the same tool and work material combination, the tool life computed using Taylor's tool life model is ____minutes (rounded off to 2 decimal places).
- GATE Metallurgy - 2024
- Materials, Manufacturing & Industrial Engineering
- Metal forming processes
- A blanking operation is performed on C20 steel sheet to obtain a circular disc having a diameter of 20 mm and a thickness of 2 mm. An allowance of 0.04 is provided. The punch size used for the operation is _____mm (rounded off to 2 decimal places).
- GATE Metallurgy - 2024
- Materials, Manufacturing & Industrial Engineering
- Metal forming processes
- The "Earing" phenomenon in metal forming is associated with
- GATE Metallurgy - 2024
- Materials, Manufacturing & Industrial Engineering
- Metal forming processes
Questions Asked in GATE Metallurgy exam
- A ram in the form of a rectangular body of size l=9m and b=2m is suspended by two parallel ropes of lengths 7m. Assume the center-of-mass of the body is at its geometric center and g = 9.81m/s2. For striking the object P with a horizontal velocity of 5m/s, what is the angle θ with the vertical from which the ram should be released from rest?
- GATE Metallurgy - 2024
- Forces on submerged bodies
- If the value of the double integral
\(\displaystyle\int^{4}_{x=3}\displaystyle\int^{2}_{y=1}\frac{dydx}{(x+y)^2}\)
is \(\log e (\frac{a}{24})\), then a is ____ (answer in integer).- GATE Metallurgy - 2024
- Integration by trapezoidal and Simpson’s rules
- If x(t) satisfies the differential equation
\(t\frac{dx}{dt}+(t-x)=0\)
subject to the condition x(1) = 0, then the value of x(2) is_____(rounded off to 2 decimal places).- GATE Metallurgy - 2024
- Higher order linear ODEs with constant coefficients
- The value of the surface integral
\(\displaystyle\oiint_{s}zdxdy\)
where S is the external surface of the sphere x2 + y2 + z2 = R2 is- GATE Metallurgy - 2024
- Vector identities
- A heat pump (H.P.) is driven by the work output of a heat engine (H.E.) as shown in the figure. The heat engine extracts 150 kJ of heat from the source at 1000 K. The heat pump absorbs heat from the ambient at 280 K and delivers heat to the room which is maintained at 300 K. Considering the combined system to be ideal, the total amount of heat delivered to the room together by the heat engine and heat pump is _____kJ (answer in integer).
- GATE Metallurgy - 2024
- I.C. Engines
View More Questions