Consider a solenoid carrying current supplied by a DC source with a constant emf containing iron core inside it. When the core is pulled out of the solenoid, the change in current will
- remain same
- decrease
- increase
- modulate
The Correct Option is A
Solution and Explanation
change in current will remain same
Top Questions on Inductance
- What is the self inductance of a solenoid of length 50 cm, if area of cross section is 10 cm2 and total number of turns is 600?
- CUET (UG) - 2023
- Physics
- Inductance
- If mutual inductance M=3H, L1=4H, L2=9H, then the coefficient of coupling will be equal to?
- MHT CET - 2023
- Physics
- Inductance
- The self-inductance of a solenoid is
- CUET (PG) - 2023
- Physics
- Inductance
- Find the mutual inductance in the arrangement, when a small circular loop of wire of radius ‘R’ is placed inside a large square loop of wire of side L (L << R). The loops are coplanar and their centres coincide:
- JEE Main - 2023
- Physics
- Inductance
- A small square loop of wire of side l is placed inside a large square loop of wire L(L>>l). As shown in figure, both loops are coplanar and their centers coincide at point O. The mutual inductance of the system is:
- JEE Main - 2022
- Physics
- Inductance
Questions Asked in TS EAMCET exam
The ratio of the radii of two solid spheres of same mass in 2:3. The ratio of the moments of inertia of the spheres about their diameters is:
- TS EAMCET - 2023
- rotational motion
If (-c, c) is the set of all values of x for which the expansion is (7 - 5x)-2/3 is valid, then 5c + 7 =
- TS EAMCET - 2023
- Algebra of Complex Numbers
The general solution of the differential equation (x2 + 2)dy +2xydx = ex(x2+2)dx is
- TS EAMCET - 2023
- Differential equations
If i=√-1 then
\[Arg\left[ \frac{(1+i)^{2025}}{1+i^{2022}} \right] =\]- TS EAMCET - 2023
- Trigonometric Identities
If nCr denotes the number of combinations of n distinct things taken r at a time, then the domain of the function g (x)= (16-x)C(2x-1) is
- TS EAMCET - 2023
- permutations and combinations
Concepts Used:
Inductance
Inductance is a key parameter in electrical and electronic circuit designs. Like resistance and capacitance, it is a basic electrical measurement that affects all circuits to some degree.
Inductance is used in many areas of electrical and electronic systems and circuits. The electronic components can be in a variety of forms and may be called by a variety of names: coils, inductors, chokes, transformers, . . . Each of these may also have a variety of different variants: with and without cores and the core materials may be of different types.
There are two ways in which inductance is used:
- Self-inductance: Self-inductance is the property of a circuit, often a coil, whereby a change in current causes a change in voltage in that circuit due to the magnetic effect of caused by the current flow. It can be seen that self-inductance applies to a single circuit - in other words it is an inductance, typically within a single coil. This effect is used in single coils or chokes.
- Mutual-inductance: Mutual inductance is an inductive effect where a change in current in one circuit causes a change in voltage across a second circuit as a result of a magnetic field that links both circuits. This effect is used in transformers.