Question:
Consider a hemispherical furnace of diameter D=6m with a flat base. The dome of the furnace has an emissivity of 0.7 and the flat base is a blackbody. The base and the dome are maintained at uniform temperature of 300K and 1200K, respectively. Under steady state conditions, the rate of radiation heat transfer from the dome to the base is _____kW (rounded off to the nearest integer).
Use Stefan-Boltzmann constant = 5.67×10-8 W/(m2K4)
Consider a hemispherical furnace of diameter D=6m with a flat base. The dome of the furnace has an emissivity of 0.7 and the flat base is a blackbody. The base and the dome are maintained at uniform temperature of 300K and 1200K, respectively. Under steady state conditions, the rate of radiation heat transfer from the dome to the base is _____kW (rounded off to the nearest integer).
Use Stefan-Boltzmann constant = 5.67×10-8 W/(m2K4)
Use Stefan-Boltzmann constant = 5.67×10-8 W/(m2K4)
Updated On: Oct 29, 2024
Hide Solution
Verified By Collegedunia
Correct Answer: 2720
Solution and Explanation
The correct answer is:2720 to 2740
Was this answer helpful?
1
0
Questions Asked in GATE Metallurgy exam
- A ram in the form of a rectangular body of size l=9m and b=2m is suspended by two parallel ropes of lengths 7m. Assume the center-of-mass of the body is at its geometric center and g = 9.81m/s2. For striking the object P with a horizontal velocity of 5m/s, what is the angle θ with the vertical from which the ram should be released from rest?
- GATE Metallurgy - 2024
- Forces on submerged bodies
- If the value of the double integral
\(\displaystyle\int^{4}_{x=3}\displaystyle\int^{2}_{y=1}\frac{dydx}{(x+y)^2}\)
is \(\log e (\frac{a}{24})\), then a is ____ (answer in integer).- GATE Metallurgy - 2024
- Integration by trapezoidal and Simpson’s rules
- If x(t) satisfies the differential equation
\(t\frac{dx}{dt}+(t-x)=0\)
subject to the condition x(1) = 0, then the value of x(2) is_____(rounded off to 2 decimal places).- GATE Metallurgy - 2024
- Higher order linear ODEs with constant coefficients
- The value of the surface integral
\(\displaystyle\oiint_{s}zdxdy\)
where S is the external surface of the sphere x2 + y2 + z2 = R2 is- GATE Metallurgy - 2024
- Vector identities
- A heat pump (H.P.) is driven by the work output of a heat engine (H.E.) as shown in the figure. The heat engine extracts 150 kJ of heat from the source at 1000 K. The heat pump absorbs heat from the ambient at 280 K and delivers heat to the room which is maintained at 300 K. Considering the combined system to be ideal, the total amount of heat delivered to the room together by the heat engine and heat pump is _____kJ (answer in integer).
- GATE Metallurgy - 2024
- I.C. Engines
View More Questions