Question:
Choose the correct option(s) from the following
Choose the correct option(s) from the following
Updated On: Jun 14, 2022
- Natural rubber is polyisoprene containing trans alkene units
- Nylon-6 has amide linkages
- Teflon is prepared by heating tetrafluoroethene in presence of a persulphate catalyst at high pressure
- Cellulose has only $\alpha$-D-glucose units that are joined by glycosidic linkages
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
1. Natural rubber is polyisoprene containing cis alkene units
2. Nylon-6 has amide linkage
3. Cellulose has only $\beta-D$ glucose units.
2. Nylon-6 has amide linkage
3. Cellulose has only $\beta-D$ glucose units.
Was this answer helpful?
0
0
Top Questions on Polymers
- A polymer melt being extruded through a spinneret hole of circular cross-section exhibits a die-swell ratio of 2.2. The extrusion velocity and volumetric flow rate during this extrusion process are 20 m/min and \(2.6 \times 10^{-8}\) m\(^3\)/s, respectively. The maximum diameter (mm) of the extruded melt after exit from the spinneret hole (rounded off to 2 decimal places) is:
- The main constituent of vinegar is:
- The monomer of natural rubber is:
- The catalyst used in the preparation of high density polythene is
- Arrange the following polymers in increasing order of intermolecular forces:
View More Questions
Questions Asked in JEE Advanced exam
- Let $ x_0 $ be the real number such that $ e^{x_0} + x_0 = 0 $. For a given real number $ \alpha $, define $$ g(x) = \frac{3xe^x + 3x - \alpha e^x - \alpha x}{3(e^x + 1)} $$ for all real numbers $ x $. Then which one of the following statements is TRUE?
- JEE Advanced - 2025
- Fundamental Theorem of Calculus
- A linear octasaccharide (molar mass = 1024 g mol$^{-1}$) on complete hydrolysis produces three monosaccharides: ribose, 2-deoxyribose and glucose. The amount of 2-deoxyribose formed is 58.26 % (w/w) of the total amount of the monosaccharides produced in the hydrolyzed products. The number of ribose unit(s) present in one molecule of octasaccharide is _____.
Use: Molar mass (in g mol$^{-1}$): ribose = 150, 2-deoxyribose = 134, glucose = 180; Atomic mass (in amu): H = 1, O = 16- JEE Advanced - 2025
- Biomolecules
Let $ P(x_1, y_1) $ and $ Q(x_2, y_2) $ be two distinct points on the ellipse $$ \frac{x^2}{9} + \frac{y^2}{4} = 1 $$ such that $ y_1 > 0 $, and $ y_2 > 0 $. Let $ C $ denote the circle $ x^2 + y^2 = 9 $, and $ M $ be the point $ (3, 0) $. Suppose the line $ x = x_1 $ intersects $ C $ at $ R $, and the line $ x = x_2 $ intersects $ C $ at $ S $, such that the $ y $-coordinates of $ R $ and $ S $ are positive. Let $ \angle ROM = \frac{\pi}{6} $ and $ \angle SOM = \frac{\pi}{3} $, where $ O $ denotes the origin $ (0, 0) $. Let $ |XY| $ denote the length of the line segment $ XY $. Then which of the following statements is (are) TRUE?
- JEE Advanced - 2025
- Conic sections
- Adsorption of phenol from its aqueous solution on to fly ash obeys Freundlich isotherm. At a given temperature, from 10 mg g$^{-1}$ and 16 mg g$^{-1}$ aqueous phenol solutions, the concentrations of adsorbed phenol are measured to be 4 mg g$^{-1}$ and 10 mg g$^{-1}$, respectively. At this temperature, the concentration (in mg g$^{-1}$) of adsorbed phenol from 20 mg g$^{-1}$ aqueous solution of phenol will be ____. Use: $\log_{10} 2 = 0.3$
- JEE Advanced - 2025
- Adsorption
- At 300 K, an ideal dilute solution of a macromolecule exerts osmotic pressure that is expressed in terms of the height (h) of the solution (density = 1.00 g cm$^{-3}$) where h is equal to 2.00 cm. If the concentration of the dilute solution of the macromolecule is 2.00 g dm$^{-3}$, the molar mass of the macromolecule is calculated to be $X \times 10^{4}$ g mol$^{-1}$. The value of $X$ is ____. Use: Universal gas constant (R) = 8.3 J K$^{-1}$ mol$^{-1}$ and acceleration due to gravity (g) = 10 m s$^{-2}\}$
- JEE Advanced - 2025
- Colligative Properties
View More Questions
Concepts Used:
Polymers of Commercial Importance
- Polypropene is formed by the repetitive joining of propene. Propene is the monomer of Polypropene. It is used in the preparation of different materials like fibres, ropes, pipes etc.
- Polystyrene is formed from aromatic hydrocarbons, styrene is its monomer. It is used as a wrapping material to provide coverage to important materials, cabinets of television, in making radios.
- Polyvinyl Chloride (PVC) is formed by combining a large number of molecules of vinyl chloride. Vinyl chloride is its monomer. It is used in making raincoats and especially in water pipes.
- Glyptal is a synthetic polymer that is formed by monomers of Ethylene glycol and Phthalic acid. It is used in the manufacturing of paints, fabrics, lacquers etc.
- Bakelite is known as Polyoxybenzylmethylenglycolanhydride. Phenol and Formaldehyde are used as monomers to produce bakelite which is formed by the condensation reaction of these monomers.
- Natural Rubber is composed of polyisoprene molecules linked together to form an elastomeric structure. Natural rubber is used for various purposes like making tyres, rubber bands, lid grippers etc.
- Polypropylene is a hydrocarbon polymer that has a linear structure. It is a multifaceted polymer as it has properties of plastic as well as fibre and hence is used for multi-purposes. Propylene is the monomer of polypropylene.
- Polyethylene Terephthalate also termed PET is a thermoplastic polymer. Ethylene glycol and terephthalic acid are used in the preparation of Polyethylene Terephthalate and in making different things like containers for packing food and drinks.
- Polytetrafluoroethylene also termed PTFE is a fluoropolymer. It is slippery in nature and is highly resistant to heat. The monomer of polytetrafluoroethylene is tetrafluoroethylene.
Neoprene is formed from chloroprene. It is prepared by free radical polymerisation. The monomer of neoprene is chloroprene. It is used for preparing gaskets, conveyor belts etc.