Question:
Caprolactam is the starting material for
Caprolactam is the starting material for
Updated On: Mar 12, 2025
Nylon 6,6
Nylon 6
Nylon 2,6
Dacron
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Caprolactam is the starting material for Nylon 6.
Was this answer helpful?
2
0
Top Questions on Polymers
- A polymer melt being extruded through a spinneret hole of circular cross-section exhibits a die-swell ratio of 2.2. The extrusion velocity and volumetric flow rate during this extrusion process are 20 m/min and \(2.6 \times 10^{-8}\) m\(^3\)/s, respectively. The maximum diameter (mm) of the extruded melt after exit from the spinneret hole (rounded off to 2 decimal places) is:
- The main constituent of vinegar is:
- The monomer of natural rubber is:
- The catalyst used in the preparation of high density polythene is
- Arrange the following polymers in increasing order of intermolecular forces:
View More Questions
Questions Asked in CUET exam
- Find the ratio of de-Broglie wavelengths of deuteron having energy E and \(\alpha\)-particle having energy 2E :
- CUET (UG) - 2026
- Dual nature of radiation and matter
- The angles of elevation of the top of a tower from two points at a distance of 5 meters and 20 meters along the same straight line from the base of the tower, are complementary. Find the height of the tower.
- CUET (UG) - 2025
- Trigonometry
- Had he ________ the importance of the meeting, he would have made sure to attend.
Rearrange the following parts to form a meaningful and grammatically correct sentence:
P. a healthy diet and regular exercise
Q. are important habits
R. that help maintain good physical and mental health
S. especially in today's busy world- CUET (UG) - 2025
- Sentence Arrangement
- The following solutions were prepared by dissolving 1 g of solute in 1 L of the solution. Arrange the following solutions in decreasing order of their molarity: (A) Glucose (molar mass = 180 g mol$^{-1}$)
(B) NaOH (molar mass = 40 g mol$^{-1}$)
(C) NaCl (molar mass = 58.5 g mol$^{-1}$)
(D) KCl (molar mass = 7(4)5 g mol$^{-1}$)
- CUET (UG) - 2025
- Mole concept and Molar Masses
View More Questions
Concepts Used:
Polymers of Commercial Importance
- Polypropene is formed by the repetitive joining of propene. Propene is the monomer of Polypropene. It is used in the preparation of different materials like fibres, ropes, pipes etc.
- Polystyrene is formed from aromatic hydrocarbons, styrene is its monomer. It is used as a wrapping material to provide coverage to important materials, cabinets of television, in making radios.
- Polyvinyl Chloride (PVC) is formed by combining a large number of molecules of vinyl chloride. Vinyl chloride is its monomer. It is used in making raincoats and especially in water pipes.
- Glyptal is a synthetic polymer that is formed by monomers of Ethylene glycol and Phthalic acid. It is used in the manufacturing of paints, fabrics, lacquers etc.
- Bakelite is known as Polyoxybenzylmethylenglycolanhydride. Phenol and Formaldehyde are used as monomers to produce bakelite which is formed by the condensation reaction of these monomers.
- Natural Rubber is composed of polyisoprene molecules linked together to form an elastomeric structure. Natural rubber is used for various purposes like making tyres, rubber bands, lid grippers etc.
- Polypropylene is a hydrocarbon polymer that has a linear structure. It is a multifaceted polymer as it has properties of plastic as well as fibre and hence is used for multi-purposes. Propylene is the monomer of polypropylene.
- Polyethylene Terephthalate also termed PET is a thermoplastic polymer. Ethylene glycol and terephthalic acid are used in the preparation of Polyethylene Terephthalate and in making different things like containers for packing food and drinks.
- Polytetrafluoroethylene also termed PTFE is a fluoropolymer. It is slippery in nature and is highly resistant to heat. The monomer of polytetrafluoroethylene is tetrafluoroethylene.
Neoprene is formed from chloroprene. It is prepared by free radical polymerisation. The monomer of neoprene is chloroprene. It is used for preparing gaskets, conveyor belts etc.