Question:
Bakelite is a product of the reaction between
Bakelite is a product of the reaction between
Updated On: Jul 18, 2024
- formaldehyde and NaOH
- aniline and urea
- phenol and methanal
- phenol and chloroform
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Bakelite is a product of reaction between phenol and formaldehyde (methanal).
Was this answer helpful?
0
0
Top Questions on Polymers
- A polymer melt being extruded through a spinneret hole of circular cross-section exhibits a die-swell ratio of 2.2. The extrusion velocity and volumetric flow rate during this extrusion process are 20 m/min and \(2.6 \times 10^{-8}\) m\(^3\)/s, respectively. The maximum diameter (mm) of the extruded melt after exit from the spinneret hole (rounded off to 2 decimal places) is:
- The main constituent of vinegar is:
- The monomer of natural rubber is:
- The catalyst used in the preparation of high density polythene is
- Arrange the following polymers in increasing order of intermolecular forces:
View More Questions
Questions Asked in NEET exam
- Two cities X and Y are connected by a regular bus service with a bus leaving in either direction every T min. A girl is driving scooty with a speed of 60 km/h in the direction X to Y. She notices that a bus goes past her every 30 minutes in the direction of her motion, and every 10 minutes in the opposite direction. Choose the correct option for the period T of the bus service and the speed (assumed constant) of the buses.
- NEET (UG) - 2025
- Relative Velocity
- A physical quantity P is related to four observations a, b, c, and d as follows: P = a3 b2 (c / √d) The percentage errors of measurement in a, b, c, and d are 1%, 3%, 2%, and 4% respectively. The percentage error in the quantity P is:
- NEET (UG) - 2025
- Dimensional analysis and its applications
What is Microalbuminuria ?
- NEET (UG) - 2025
- Human physiology
The output (Y) of the given logic implementation is similar to the output of an/a …………. gate.
- NEET (UG) - 2025
- Logic gates
- An oxygen cylinder of volume 30 litre has 18.20 moles of oxygen. After some oxygen is withdrawn from the cylinder, its gauge pressure drops to 11 atmospheric pressure at temperature \(27^\circ\)C. The mass of the oxygen withdrawn from the cylinder is nearly equal to: [Given, \(R = \frac{100}{12} \text{ J mol}^{-1} \text{K}^{-1}\), and molecular mass of \(O_2 = 32 \text{ g/mol}\), 1 atm pressure = \(1.01 \times 10^5 \text{ N/m}^2\)]
- NEET (UG) - 2025
- Ideal-gas equation and absolute temperature
View More Questions
Concepts Used:
Polymers of Commercial Importance
- Polypropene is formed by the repetitive joining of propene. Propene is the monomer of Polypropene. It is used in the preparation of different materials like fibres, ropes, pipes etc.
- Polystyrene is formed from aromatic hydrocarbons, styrene is its monomer. It is used as a wrapping material to provide coverage to important materials, cabinets of television, in making radios.
- Polyvinyl Chloride (PVC) is formed by combining a large number of molecules of vinyl chloride. Vinyl chloride is its monomer. It is used in making raincoats and especially in water pipes.
- Glyptal is a synthetic polymer that is formed by monomers of Ethylene glycol and Phthalic acid. It is used in the manufacturing of paints, fabrics, lacquers etc.
- Bakelite is known as Polyoxybenzylmethylenglycolanhydride. Phenol and Formaldehyde are used as monomers to produce bakelite which is formed by the condensation reaction of these monomers.
- Natural Rubber is composed of polyisoprene molecules linked together to form an elastomeric structure. Natural rubber is used for various purposes like making tyres, rubber bands, lid grippers etc.
- Polypropylene is a hydrocarbon polymer that has a linear structure. It is a multifaceted polymer as it has properties of plastic as well as fibre and hence is used for multi-purposes. Propylene is the monomer of polypropylene.
- Polyethylene Terephthalate also termed PET is a thermoplastic polymer. Ethylene glycol and terephthalic acid are used in the preparation of Polyethylene Terephthalate and in making different things like containers for packing food and drinks.
- Polytetrafluoroethylene also termed PTFE is a fluoropolymer. It is slippery in nature and is highly resistant to heat. The monomer of polytetrafluoroethylene is tetrafluoroethylene.
Neoprene is formed from chloroprene. It is prepared by free radical polymerisation. The monomer of neoprene is chloroprene. It is used for preparing gaskets, conveyor belts etc.