Question:
As per IS 875, where access is not provided except for maintenance, live load on roofs, while designing a truss, in respect of its plan area is adopted as
As per IS 875, where access is not provided except for maintenance, live load on roofs, while designing a truss, in respect of its plan area is adopted as
Show Hint
Always refer to IS 875 for live load specifications based on building usage and access type when designing roof structures.
Updated On: May 3, 2025
- 100 N/sq.m
- 400 N/sq.m
- 750 N/sq.m
- 1500 N/sq.m
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
According to IS 875, the live load for roofs where access is not provided except for maintenance is specified as 400 N/sq.m. This is based on the standard load provisions for roof structures that are not designed for frequent access. Hence, the correct answer is 400 N/sq.m.
Was this answer helpful?
0
0
Top Questions on Structural Analysis
- Plastic analysis must satisfy the following conditions
- AP PGECET - 2024
- Civil Engineering
- Structural Analysis
- If the degrees of redundancy for a structure is \( r \), the number of plastic hinges required to convert a stable structure into an unstable mechanism is
- AP PGECET - 2024
- Civil Engineering
- Structural Analysis
- A fixed beam of uniform cross-section carries a point load \( P \) at the mid-span. If the moment of inertia of the middle half portion is reduced to half its previous value, then the fixed end moments will
- TANCET - 2024
- Civil Engineering
- Structural Analysis
Questions Asked in AP PGECET exam
The rank of matrix \(\begin{bmatrix} k & -1 & 0 \\[0.3em] 0 & k & -1 \\[0.3em] -1 & 0 & k \end{bmatrix}\) is 2, for \( k = \)
- AP PGECET - 2024
- Rank of a Matrix
If \(A = \begin{bmatrix} 4 & 2 \\[0.3em] -3 & 3 \end{bmatrix}\), then \(A^{-1} =\)
- AP PGECET - 2024
- Inverse of a Matrix
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- AP PGECET - 2024
- Two Port Networks
An induction motor when started on load does not accelerate up to full speed but runs at \({\frac {1}{17}}\)th of the rated speed. The motor is said to be:
- AP PGECET - 2024
- Induction Motor
A 0 to 30 V voltmeter has an error of \(\pm 2\%\) of FSD. What is the range of readings if the voltage is 30V?
- AP PGECET - 2024
- Errors in Measurement
View More Questions