An alternating voltage source $V =260 \sin (628 t )$ is connected across a pure inductor of $5 mH$ Inductive reactance in the circuit is :
An alternating voltage source $V =260 \sin (628 t )$ is connected across a pure inductor of $5 mH$ Inductive reactance in the circuit is :
Show Hint
- $3.14 \Omega$
- $6.28 S$
- $0.318 \Omega$
- $0.5 \Omega$
The Correct Option is A
Solution and Explanation
Top Questions on Alternating current
- An alternating current is given by \[ I = I_A \sin \omega t + I_B \cos \omega t. \] The r.m.s. current will be:
- JEE Main - 2025
- Physics
- Alternating current
- An inductor of reactance $ 100 \, \Omega $, a capacitor of reactance $ 50 \, \Omega $, and a resistor of resistance $ 50 \, \Omega $ are connected in series with an AC source of $ 10 \, V $, $ 50 \, Hz $. Average power dissipated by the circuit is ____ W.
- JEE Main - 2025
- Physics
- Alternating current
- A 132 V ac source is connected to a pure inductor of inductance 140 mH. If the frequency of the ac source is 50 Hz, then the current passing through the inductor is
- TS EAMCET - 2025
- Physics
- Alternating current
- A resistor of resistance 160 $\Omega$, an inductor of 280 mH, and a capacitor are connected in series to an AC source of 80 V, 50 Hz. If the circuit is in resonance, the potential difference across the capacitor is:
- TS EAMCET - 2025
- Physics
- Alternating current
- An electric bulb, an open coil inductor, an ac source and a key are all connected in series to form a closed circuit. The key is closed and after some time an iron rod is inserted into the interior of the inductor, then
- TS EAMCET - 2025
- Physics
- Alternating current
Questions Asked in JEE Main exam
- Let \( P(4, 4\sqrt{3}) \) be a point on the parabola \( y^2 = 4ax \) and PQ be a focal chord of the parabola. If M and N are the foot of the perpendiculars drawn from P and Q respectively on the directrix of the parabola, then the area of the quadrilateral PQMN is equal to:
- JEE Main - 2025
- Parabola
A(g) $ \rightarrow $ B(g) + C(g) is a first order reaction.
The reaction was started with reactant A only. Which of the following expression is correct for rate constant k ?- JEE Main - 2025
- Chemical Kinetics
- Let the ellipse $ 3x^2 + py^2 = 4 $ pass through the centre $ C $ of the circle $ x^2 + y^2 - 2x - 4y - 11 = 0 $ of radius $ r $. Let $ f_1, f_2 $ be the focal distances of the point $ C $ on the ellipse. Then $ 6f_1 f_2 - r $ is equal to
- JEE Main - 2025
- Conic sections
$\mathrm{KMnO}_{4}$ acts as an oxidising agent in acidic medium. ' X ' is the difference between the oxidation states of Mn in reactant and product. ' Y ' is the number of ' d ' electrons present in the brown red precipitate formed at the end of the acetate ion test with neutral ferric chloride. The value of $\mathrm{X}+\mathrm{Y}$ is _______ .
- JEE Main - 2025
- Redox reactions
- The percentage dissociation of a salt (MX$_3$) solution at a given temperature (van't Hoff factor $i = 2$) is .................. % (Nearest integer)
- JEE Main - 2025
- Colligative Properties
Concepts Used:
Alternating Current
An alternating current can be defined as a current that changes its magnitude and polarity at regular intervals of time. It can also be defined as an electrical current that repeatedly changes or reverses its direction opposite to that of Direct Current or DC which always flows in a single direction as shown below.
Alternating Current Production
Alternating current can be produced or generated by using devices that are known as alternators. However, alternating current can also be produced by different methods where many circuits are used. One of the most common or simple ways of generating AC is by using a basic single coil AC generator which consists of two-pole magnets and a single loop of wire having a rectangular shape.
Application of Alternating Current
AC is the form of current that are mostly used in different appliances. Some of the examples of alternating current include audio signal, radio signal, etc. An alternating current has a wide advantage over DC as AC is able to transmit power over large distances without great loss of energy.