A transformer operating at primary voltage 8 kV and secondary voltage 160 V serves a load of 80 kW. Assuming the transformer to be ideal with purely resistive load and working on unity power factor, the loads in the primary and secondary circuit would be
- 800 Ω and 1.06 Ω
- 10 Ω and 500 Ω
- 800 Ω and 0.32 Ω
- 1.06 Ω and 500 Ω
The Correct Option is C
Solution and Explanation
Top Questions on Alternating current
- An inductor of reactance $ 100 \, \Omega $, a capacitor of reactance $ 50 \, \Omega $, and a resistor of resistance $ 50 \, \Omega $ are connected in series with an AC source of $ 10 \, V $, $ 50 \, Hz $. Average power dissipated by the circuit is ____ W.
- JEE Main - 2025
- Physics
- Alternating current
- In an LC circuit, the inductance \( L \) is \( 2 \, \text{H} \) and the capacitance \( C \) is \( 4 \, \mu\text{F} \). What is the frequency of oscillation of the circuit?
- MHT CET - 2025
- Physics
- Alternating current
- Given the voltage equation \( V = 100 \sqrt{2} \sin(\omega t) \) and capacitance \( C = 2 \, \mu \text{F} \), calculate the RMS current.
- MHT CET - 2025
- Physics
- Alternating current
- In domestic electric mains supply, the voltage and the current are
- KCET - 2025
- Physics
- Alternating current
- An AC voltage \( V = 50\sqrt{2} \sin(100t) \) is applied across a capacitor of capacitance \( C = 1 \mu F \). What is the rms value of the current through the capacitor?
- MHT CET - 2025
- Physics
- Alternating current
Questions Asked in JEE Main exam
- Identify A, B, and C in the given reaction sequence: \[ \text{A} \xrightarrow{\text{HNO}_3} \text{Pb(NO}_3)_2 \xrightarrow{\text{H}_2\text{SO}_4} \text{B} \rightarrow \text{C (Yellow ppt)}. \]
- JEE Main - 2025
- Chemical Reactions
Consider the following molecules:
The order of rate of hydrolysis is:- JEE Main - 2025
- Hydrolysis of salts
- If \( z_1, z_2, z_3 \in \mathbb{C} \) are the vertices of an equilateral triangle, whose centroid is \( z_0 \), then \( \sum_{k=1}^{3} (z_k - z_0)^2 \) is equal to
- JEE Main - 2025
- complex numbers
Two cells of emf 1V and 2V and internal resistance 2 \( \Omega \) and 1 \( \Omega \), respectively, are connected in series with an external resistance of 6 \( \Omega \). The total current in the circuit is \( I_1 \). Now the same two cells in parallel configuration are connected to the same external resistance. In this case, the total current drawn is \( I_2 \). The value of \( \left( \frac{I_1}{I_2} \right) \) is \( \frac{x}{3} \). The value of x is 1cm.
- JEE Main - 2025
- Current electricity
Let A = \(\begin{bmatrix} \log_5 128 & \log_4 5 \log_5 8 & \log_4 25 \end{bmatrix}\) \). If \(A_{ij}\) is the cofactor of \( a_{ij} \), \( C_{ij} = \sum_{k=1}^2 a_{ik} A_{jk} \), and \( C = [C_{ij}] \), then \( 8|C| \) is equal to:
- JEE Main - 2025
- Applications of Determinants and Matrices
Concepts Used:
Alternating Current
An alternating current can be defined as a current that changes its magnitude and polarity at regular intervals of time. It can also be defined as an electrical current that repeatedly changes or reverses its direction opposite to that of Direct Current or DC which always flows in a single direction as shown below.
Alternating Current Production
Alternating current can be produced or generated by using devices that are known as alternators. However, alternating current can also be produced by different methods where many circuits are used. One of the most common or simple ways of generating AC is by using a basic single coil AC generator which consists of two-pole magnets and a single loop of wire having a rectangular shape.
Application of Alternating Current
AC is the form of current that are mostly used in different appliances. Some of the examples of alternating current include audio signal, radio signal, etc. An alternating current has a wide advantage over DC as AC is able to transmit power over large distances without great loss of energy.