Question:
A thin copper wire carries electric current and is insulated by putting a sleeve, of thickness t, over it. In steady state conditions, the rate of heat loss from the insulated wire per unit length is Q. Which of the following is TRUE?
A thin copper wire carries electric current and is insulated by putting a sleeve, of thickness t, over it. In steady state conditions, the rate of heat loss from the insulated wire per unit length is Q. Which of the following is TRUE?
Updated On: Jul 12, 2024
- Q increases monotonically with t.
- Q decreases monotonically with t.
- Q first increases with increase in t, and then it decreases with further increase in t.
- Q first decreases with increase in t, and then it increases with further increase in t.
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
The correct option is (C): Q first increases with increase in t, and then it decreases with further increase in t.
Was this answer helpful?
0
0
Top Questions on Electric Current
- An element \(\triangle l=\triangle x \hat i\) is placed at the origin and carries a large current I = 10A. The magnetic field on the y-axis at a distance of 0.5 m from the elements x of 1 cm length is :
- JEE Main - 2024
- Physics
- Electric Current
- The number of electrons flowing per second in the filament of a 110 W bulb operating at 220 V is: (Given $e = 1.6 \times 10^{-19}$ C)
- JEE Main - 2024
- Physics
- Electric Current
- An electric bulb rated 50 W – 200 V is connected across a 100 V supply. The power dissipation of the bulb is :
- JEE Main - 2024
- Physics
- Electric Current
- In the following circuit, the battery has an emf of \(2 \, \text{V}\) and an internal resistance of \(\frac{2}{3} \, \Omega\). The power consumption in the entire circuit is ______ W.
- JEE Main - 2024
- Physics
- Electric Current
- Two currents 3 mA and 5 mA are flowing towards the junction in a circuit and three currents 1 mA, 1.5 mA and x are flowing away. The value of x (in mA) is
- AP POLYCET - 2024
- Physics
- Electric Current
View More Questions
Questions Asked in GATE PI exam
- A metallic cylindrical pressure vessel, used to store compressed air in a plant, has 1 m mean radius and 4 mm wall thickness. The maximum allowable normal and shear stresses in the cylindrical portion of the vessel are 100 MPa and 40 MPa, respectively. Considering only these data in the design, the maximum allowable internal gauge pressure (in MPa) of the compressed air is ______ . (Rounded off to 2 decimal places)
- GATE PI - 2024
- Stress-Strain behavior of metals and alloys
- The following differential equation governs the evolution of variable \(x(t)\) with time \(t, t \geq 0\).
\(\frac {d^2x}{dt^2} + 4x = e^{-t}\)
Given the initial conditions \(x = 0\) and \(\frac {dx}{dt} = 0\) at \(t = 0\), the value of \(x\) at \(t =\frac {\pi}{8}\) is _____ . (Rounded off to 3 decimal places)- GATE PI - 2024
- Differential Equations
- A CNC milling operation is carried out by moving the tool from the point A to point B in anti-clockwise direction to cut a slot of quarter circle with center at C, as shown. The coordinates of the points A and B are (0,0) and (10,10), respectively. All dimensions are in mm. If the feed rate at point P along x-axis is 6 mm/min, then the feed rate (in mm/min) at point P along y-axis is ______ . (Rounded off to 1 decimal place)
- GATE PI - 2024
- Machining parameters and material removal rate
- In a sand mold, a sprue of height \(h_2=200\ mm\) is to be provided for maintaining the molten metal flow rate of \(10^6\ mm^3/s\). The height of liquid column above the point 2 is kept constant at \(h_c=25\ mm\). The cross-sectional areas of the sprue at points 2 and 3 are \(A_2\) and \(A_3\), respectively. The points 1 and 3 are at the atmospheric pressure. Assuming the gauge pressure at point 2 to be zero as the limiting case to prevent aspiration effect, the ratio \(\frac {A_3}{A_2}\) _____ . (Rounded off to 2 decimal places)
- GATE PI - 2024
- Fluid Mechanics
- An assembly line consists of three work stations (\(S_1, S_2\) and \(S_3\)) in series to assemble a toy. The times required to perform tasks at these stations are 6, 4 and T minutes, respectively. If the efficiency of the assembly line in the steady state is 75%, then the maximum value of T (in minutes) is _____ . (Answer in integer)
- GATE PI - 2024
- Production Control
View More Questions