A temperature control system is usually very sluggish. To improve its dynamics:
Show Hint
- a PI controller can be used
- an I controller can be used
- PID controller with large I and negligible D can be used
- PD controller can be used
The Correct Option is D
Solution and Explanation
Top Questions on Control Systems
A feedback control system is shown in the figure.
The maximum allowable value of \( n \) such that the output \( y(t) \), due to any step disturbance signal \( d(t) \), becomes zero at steady-state, is ________ (in integer).
- GATE IN - 2025
- Control Systems
- Control Systems
The plant in the feedback control system shown in the figure is \( P(s) = \frac{a}{s^2 - b^2} \), where \( a > 0 \) and \( b > 0 \). The type(s) of controller \( C(s) \) that CANNOT stabilize the plant is/are
- GATE IN - 2025
- Control Systems
- Control Systems
- The figure shows a closed-loop system with a plant \(G(s) = \frac{1}{s^2}\) and a lead compensator \(C(s)\). The compensator is designed to place the dominant closed-loop poles at \(-1.5 \pm j\frac{\sqrt{27}}{2}\). From the following options, choose the phase lead that the compensator needs to contribute.
- GATE IN - 2025
- Control Systems
- Control Systems
Consider the control system block diagram given in Figure (a). The loop transfer function $G(s)H(s)$ does not have any pole on the $j\omega$-axis. The counterclockwise contour with infinite radius, as shown in Figure (b), encircles two poles of $G(s)H(s)$. Choose the correct statement from the following options for closed loop stability of the system.
- GATE IN - 2025
- Control Systems
- Control Systems
- For the transfer function \( G(s) = 1 + \frac{2s - 1}{s^3 + 5s^2 + 3s + 22} \), the number of zeros lying in the left half of the \( s \)-plane is
- GATE IN - 2025
- Control Systems
- Control Systems
Questions Asked in TS PGECET exam
- The value of the integral \[ \int_C \frac{2e^z}{(z-4)(z-2)} \, dz \] where \( C: |z| = 3 \) is
- TS PGECET - 2024
- Complex numbers
- As per URDPFI Guidelines 2015 of Government of India, choose the correct hierarchy of plans from higher order to lower order
- TS PGECET - 2024
- Planning Theory
- What distinguishes a "Multi-Sector" SEZ from a "Single-Sector" SEZ in terms of city planning?
- TS PGECET - 2024
- City Planning
Match the respective cities to their planners
City Planner(s) P Navi Mumbai 1 H.K. Mewada and Prakash M Apte Q Amaravati 2 Jamsetji Tata R Gandhinagar 3 Charles Correa S Jamshedpur 4 Hafeez Contractor - TS PGECET - 2024
- City Planning
- Which term is associated with the overall visual experience and impressions gathered while observing and analysing a space?
- TS PGECET - 2024
- Visual and Urban Design
