When a square loop is formed from a wire with resistance \(R\) and a voltage of 12 V is applied between two adjacent corners, we can consider the square as two resistors in series along one side of the square and two in series along the other side, forming two parallel paths from one corner to the opposite corner.
Step 1: Each side of the square has resistance \( \frac{R}{4} \). The total resistance between two adjacent corners (half the square) is: \[ R_{{half}} = \frac{R}{4} + \frac{R}{4} = \frac{R}{2} \] Step 2: The equivalent resistance between opposite corners (along the diagonal), with two such half resistances in parallel, is: \[ R_{{diag}} = \frac{R_{{half}} \times R_{{half}}}{R_{{half}} + R_{{half}}} = \frac{\frac{R}{2} \times \frac{R}{2}}{\frac{R}{2} + \frac{R}{2}} = \frac{R}{4} \] Step 3: The current through the circuit, using Ohm's law (\(I = \frac{V}{R}\)), is: \[ I = \frac{12 \, V}{\frac{R}{4}} = \frac{48}{R} \] Step 4: The voltage across the diagonal, where the resistance is \( \frac{R}{4} \), becomes: \[ V_{{diag}} = I \times R_{{diag}} = \frac{48}{R} \times \frac{R}{4} = 12 \, V \times \frac{2}{3} = 8 \, V \]
A metal plate of area 10-2m2 rests on a layer of castor oil, 2 × 10-3m thick, whose viscosity coefficient is 1.55 Ns/m2. The approximate horizontal force required to move the plate with a uniform speed of 3 × 10-2ms-1 is:
The mass of particle X is four times the mass of particle Y. The velocity of particle Y is four times the velocity of X. The ratio of de Broglie wavelengths of X and Y is:
Arrange the following in increasing order of their pK\(_b\) values.