Question:

A sliding rod $AB$ of resistance $R$ is shown in figure. Here magnetic field $B$ is constant and is out of the paper Parallel wires have no resistance and the rod is moving with constant velocity $v$. The current in the sliding rod $AB$ when switch $S$ is closed at time $t =0$ is

Updated On: Jul 2, 2022
  • $\frac{v\,Bd}{R}e^{-t/ c}$
  • $\frac{v\,Bd}{R}e^{-t/ Rc}$
  • $\frac{v\,Bd}{R}e^{ Rtc}$
  • $\frac{v\,Bd}{R}e^{t/ Rc}$
Hide Solution
collegedunia
Verified By Collegedunia

The Correct Option is B

Solution and Explanation

Here magnetic field $\vec{B}$ is constant and is out of paper When the sliding rod $AB$ moves with a velocity $v$ in the direction shown in the figure, the induced current in $AB$ is from $A$ to $B$.
As the switch $S$ is closed at time $t = 0$ , the capacitor gets charged. If $q$ is the charge on the capacitor, then $I=\frac{dq}{dt}=\frac{Bdv}{R}-\frac{q}{RC} or \frac{q}{RC}+\frac{dq}{dt}=\frac{Bdv}{R}$ or $q=vBdc+Ae^{-t /Rc}$ (where $A$ is a constant) $...\left(i\right) $ At $t= 0 ,q = 0 $ $\therefore A-vBdC$ From $\left(i\right)$ $q =vBdC\left[1-e^{-t /RC}\right]$ $I=\frac{dq}{dt}=vBdC\times\frac{1}{RC}e^{-t /RC}$ $=\frac{vBd}{R} e^{-t /RC}$
Was this answer helpful?
0
0

Top Questions on Electromagnetic induction

View More Questions

Concepts Used:

Electromagnetic Induction

Electromagnetic Induction is a current produced by the voltage production due to a changing magnetic field. This happens in one of the two conditions:-

  1. When we place the conductor in a changing magnetic field.
  2. When the conductor constantly moves in a stationary field.

Formula:

The electromagnetic induction is mathematically represented as:-

e=N × d∅.dt

Where

  • e = induced voltage
  • N = number of turns in the coil
  • Φ = Magnetic flux (This is the amount of magnetic field present on the surface)
  • t = time

Applications of Electromagnetic Induction

  1. Electromagnetic induction in AC generator
  2. Electrical Transformers
  3. Magnetic Flow Meter