Question:
A rectangular mine airway of 2.0 m width and 2.5 m height has a bend with deflection of π/4 radian. If the radius of curvature of the bend is 4.0 m, the shock factor of the bend is (round off to three decimals)
A rectangular mine airway of 2.0 m width and 2.5 m height has a bend with deflection of π/4 radian. If the radius of curvature of the bend is 4.0 m, the shock factor of the bend is (round off to three decimals)
Updated On: Jul 18, 2024
- 0.014
- 0.024
- 0.051
- 0.071
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): 0.014
Was this answer helpful?
0
0
Top Questions on Curves
- For the curve \( y(1 + x^2) = 2 - x \), if \(\frac{dy}{dx} = \frac{1}{A}\) at the point where the curve crosses the x-axis, then the value of \( A \) is:
- The area (in square units) enclosed between the curve $x^2 = 4y$ and the line $x = y$ is:
- The area (in square units) bounded by the curve y = |x−2| between x = 0, y = 0, and x = 5 is:
- A particle moves along the curve \(6x = y^3 + 2\). The points on the curve at which the \(x\) coordinate is changing 8 times as fast as \(y\) coordinate are:
- The area (in square units) of the region bounded by curves \( y = x \) and \( y = x^3 \) is:
View More Questions
Questions Asked in GATE MN exam
- A Bord and Pillar panel is developed at a depth of 250 m in a flat coal seam. The vertical stress gradient is 0.027 MPa/m. If the strength of a square pillar is 12.5 MPa, the extraction ratio of the pillar for a safety factor of 1.5, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Room and pillar mining
- Water is pumped from a mine sump at the rate of 300 m3/hr to an inverted conical water tank, as shown. The rate of rise in water level in m/min, at the instant water level reaches at 5 m height from bottom of the tank, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Levels and Levelling
- A mine worker weighing (W) 600 N lifts an object of 100 N as shown. The 50% body weight is applied downward through point A and a force FE is produced parallel to x axis by the contraction of erector spinae muscle during lifting. The lumber disc, L (shown by red box) acts as a smooth hinge and keeps the upper body in static equilibrium. Ignore all other forces in the body. The magnitude of the resultant of the reaction forces, in N at the lumber disc, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Mechanization of Surface Mining
- In an opencast coal mine, blast vibrations are measured at two locations, A and B simultaneously for a maximum charge per delay (Q) of 1200 kg as given.\(PPV=K[\frac{D}{\sqrt{Q}}]^{-B}\)
Location Distance from the blast face, D (m) PPV (mm/s) A 100 112.5 B 300 20.3
where, K and ẞ are site constants. The PPV in mm/s, at a distance of 200 m from the blast face, is (round off up to 2 decimals)- GATE MN - 2024
- Ground Vibrations
- A solid ball of mass 10 kg is subjected to forces as shown. The magnitude of the acceleration in m/s2, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Optimization of Facility Location
View More Questions