Question:
A Hall sensor is based on the principle of _________
A Hall sensor is based on the principle of _________
Show Hint
The Hall sensor operates on the principle of the Lorentz force, where a magnetic field interacts with a current-carrying conductor to generate a voltage.
Updated On: Nov 25, 2025
- Photoelectric effect
- Seebeck effect
- Piezoelectric effect
- Lorentz force
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Step 1: Understanding the Hall sensor.
A Hall sensor operates based on the Lorentz force, which is the force experienced by a charged particle moving through a magnetic field. The Hall effect occurs when a current-carrying conductor is placed in a magnetic field, and it generates a voltage perpendicular to both the current and the magnetic field. This voltage is measured by a Hall sensor.
Step 2: Analyzing the options.
- (A) Incorrect, the photoelectric effect deals with the emission of electrons from a material when it absorbs light, not related to Hall sensors.
- (B) Incorrect, the Seebeck effect refers to the generation of an electric voltage due to temperature differences, not related to Hall sensors.
- (C) Incorrect, the piezoelectric effect generates voltage due to mechanical stress, not related to Hall sensors.
- (D) Correct, the Hall sensor is based on the principle of Lorentz force, which causes the Hall voltage when a magnetic field is applied. Step 3: Conclusion.
The correct answer is (D) Lorentz force.
A Hall sensor operates based on the Lorentz force, which is the force experienced by a charged particle moving through a magnetic field. The Hall effect occurs when a current-carrying conductor is placed in a magnetic field, and it generates a voltage perpendicular to both the current and the magnetic field. This voltage is measured by a Hall sensor.
Step 2: Analyzing the options.
- (A) Incorrect, the photoelectric effect deals with the emission of electrons from a material when it absorbs light, not related to Hall sensors.
- (B) Incorrect, the Seebeck effect refers to the generation of an electric voltage due to temperature differences, not related to Hall sensors.
- (C) Incorrect, the piezoelectric effect generates voltage due to mechanical stress, not related to Hall sensors.
- (D) Correct, the Hall sensor is based on the principle of Lorentz force, which causes the Hall voltage when a magnetic field is applied. Step 3: Conclusion.
The correct answer is (D) Lorentz force.
Was this answer helpful?
0
0
Top Questions on Transducers for industrial instrumentation
In the force transducer shown in Figure (a), four identical strain gauges S1, S2, S3, and S4 are mounted on a cantilever at equal distance from its base. S1 and S2 are mounted on the top surface and S3 and S4 are mounted on the bottom surface, as shown in the Figure (a). These strain gauges are to be connected to form a Wheatstone bridge consisting of four arms A, B, C, and D, as shown in the Figure (b). From the following options, the correct order to maximize the measurement sensitivity is
- GATE IN - 2025
- Sensors and Industrial Instrumentation
- Transducers for industrial instrumentation
The primary coil of a linear variable differential transformer (LVDT) is supplied with AC voltage as shown in the figure. The secondary coils are connected in series opposition and the output is measured using a true RMS voltmeter. The displacement \(x\) of the core is indicated in mm on a linear scale. At the null position \(x = 0\), the voltmeter reads 0 V. If the voltmeter reads 0.2 V for a displacement of \(x = +2\) mm, then for a displacement of \(x = -3\) mm, the voltmeter reading, in V, is:
- GATE IN - 2025
- Sensors and Industrial Instrumentation
- Transducers for industrial instrumentation
- An advantage of dual slope A/D converter is:
- TS PGECET - 2024
- Instrumentation Engineering
- Transducers for industrial instrumentation
- If the amplitude is proportional to the core movement, then the output of a Differential Transformer (LVDT) is a:
- TS PGECET - 2024
- Instrumentation Engineering
- Transducers for industrial instrumentation
- The thermocouple pair that gives the maximum sensitivity of around 273 K is:
- TS PGECET - 2024
- Instrumentation Engineering
- Transducers for industrial instrumentation
View More Questions
Questions Asked in GATE IN exam
- Consider the function \( f(z) = \frac{1}{(z+1)(z+2)(z+3)} \). The residue of \( f(z) \) at \( z = -1 \) is _________.
- GATE IN - 2022
- Residue Theorem
- In the circuit shown, the load is driven by a sinusoidal ac voltage source \( V_1 = 100 \angle 0^\circ \, \text{V} \) at 50 Hz. Given \( R_1 = 20 \, \Omega \), \( C_1 = \left(\frac{1000}{\pi}\right) \, \mu\text{F} \), \( L_1 = \left(\frac{20}{\pi}\right) \, \text{mH} \), and \( R_2 = 4 \, \Omega \), the power factor is _________ (round off to one decimal place)
- GATE IN - 2022
- Transient analysis of RLC circuits with ac excitation
- In the circuit shown, the capacitance \( C_0 = 10 \, \mu\text{F} \) and inductance \( L_0 = 1 \, \text{mH} \) and the diode is ideal. The capacitor is initially charged to 10 V and the current in the inductor is initially zero. If the switch is closed at \( t = 0 \, \text{s} \), the voltage \( V_C(t) \) (in volts) across the capacitor at \( t = 0.5 \, \text{s} \) is _________ (round off to one decimal place)
- GATE IN - 2022
- Diodes: Characteristics and Applications
- A 1 kHz sine-wave generator having an internal resistance of 50Ω generates an open-circuit voltage of 10 Vp-p. When a capacitor is connected across the output terminals, the voltage drops to 8 Vp-p. The capacitance of the capacitor (in microfarads) is _________.
- GATE IN - 2022
- Characteristics of ideal and practical operational amplifiers
- In the Wheatstone bridge circuit shown, \( R_1 = 1.5 \, k\Omega \) and \( R_2 = R_3 = R_4 = 1 \, k\Omega \). The switch is initially open and the voltage between the points C and D is \( V_{CD} \). Upon closing the switch at \( t = 0 \), the resistance in the arm AD changes by an amount \( \delta R_1 \), and the voltage between C and D changes by \( \delta V_{CD} \). The sensitivity of the bridge in volt/kilohm, defined as \( \left| \frac{\delta V_{CD}}{\delta R_1} \right| \), is _________.
- GATE IN - 2022
- Bridges and Potentiometers
View More Questions