A forward biased diode is :
The Correct Option is D
Solution and Explanation
In the process of forward biasing, the diode's anode is linked to the battery's positive terminal, while the diode's cathode is attached to the battery's negative terminal.
So, the correct option is (D):
Top Questions on Semiconductor electronics: materials, devices and simple circuits
- On the basis of energy band diagram in solids, explain the difference between conductor, semiconductor, and insulator. What is the need of doping in pure semiconductors? Write the value of current in the ideal diodes \( D_1 \) and \( D_2 \) in the given circuit.
\includegraphics[width=0.5\linewidth]{image9.png}- UP Board XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Explain the meaning of rectification. Using a p-n junction diode, draw a circuit diagram of a full-wave rectifier and give a brief description of its working. Give a graphical representation of input and output voltage/current.
- UP Board XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Temperature of a pure semiconductor is $0\ \mathrm{K$. Comment on its conductivity.}
- UP Board XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- What is meant by doping in semiconductors?
- UP Board XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- An a.c. voltage of peak value 20 V is connected in series with a silicon diode and a load resistance of 500 \(\Omega\). The forward resistance of the diode is 10 \(\Omega\) and the resistive voltage is 0.7 V. Find the peak current through the diode and peak voltage across the load.
\includegraphics[width=0.5\linewidth]{image4.png}- UP Board XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Questions Asked in NEET exam
The current passing through the battery in the given circuit, is:
- NEET (UG) - 2025
- Current electricity
A bob of heavy mass \(m\) is suspended by a light string of length \(l\). The bob is given a horizontal velocity \(v_0\) as shown in figure. If the string gets slack at some point P making an angle \( \theta \) from the horizontal, the ratio of the speed \(v\) of the bob at point P to its initial speed \(v_0\) is :
- NEET (UG) - 2025
- Pendulums
- Two cities X and Y are connected by a regular bus service with a bus leaving in either direction every T min. A girl is driving scooty with a speed of 60 km/h in the direction X to Y. She notices that a bus goes past her every 30 minutes in the direction of her motion, and every 10 minutes in the opposite direction. Choose the correct option for the period T of the bus service and the speed (assumed constant) of the buses.
- NEET (UG) - 2025
- Relative Velocity
- The intensity of transmitted light when a polaroid sheet, placed between two crossed polaroids at \(22.5^\circ\) from the polarization axis of one of the polaroids (\(I_0\) is the intensity of polarised light after passing through the first polaroid):
- NEET (UG) - 2025
- Polarization
A full wave rectifier circuit with diodes (\(D_1\)) and (\(D_2\)) is shown in the figure. If input supply voltage \(V_{in} = 220 \sin(100 \pi t)\) volt, then at \(t = 15\) msec:
- NEET (UG) - 2025
- Semiconductor Diode
Concepts Used:
P-n Junction
A P-N junction is an interface or a boundary between two semiconductor material types, namely the p-type and the n-type, inside a semiconductor.
Biasing conditions for the p-n Junction Diode:
in p-n junction diode two operating regions are there:
- P-type
- N-type
There are three biasing conditions for p-n junction diode are as follows:
- Zero bias: When there is no external voltage applied to the p-n junction diode.
- Forward bias: P-type is connected to positive terminal of the voltage potential while n-type is connected to the negative terminal.
- Reverse bias: P-type is connected to negative terminal of the voltage potential while n-type is connected to the positive terminal.