Question:
A force of 20 N is applied to push a 4 kg block on a frictionless surface. What is the acceleration of the block?
A force of 20 N is applied to push a 4 kg block on a frictionless surface. What is the acceleration of the block?
Show Hint
Always use $ F = ma $ to relate force, mass, and acceleration in mechanics problems.
Updated On: Jan 2, 2026
- 2 m/s²
- 4 m/s²
- 5 m/s²
- 6 m/s²
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Use Newton’s Second Law:
$$
F = ma \Rightarrow a = \frac{F}{m}
$$
Substituting values $ F = 20 \, \text{N}, m = 4 \, \text{kg} $: $$ a = \frac{20}{4} = 5 \, \text{m/s}^2 $$
Substituting values $ F = 20 \, \text{N}, m = 4 \, \text{kg} $: $$ a = \frac{20}{4} = 5 \, \text{m/s}^2 $$
Was this answer helpful?
0
0
Top Questions on Friction
- A block of mass 5 kg is placed on a frictionless surface and pushed with a force of 20 N at an angle of 30° to the horizontal. What is the acceleration of the block?
- A cubic block of mass $ m $ is sliding down on an inclined plane at $ 60^\circ $ with an acceleration of $ \frac{g}{2} $, the value of coefficient of kinetic friction is:
- A particle is in uniform circular motion. The equation of its trajectory is given by \( x = 2t^2 - 3t + 5 \), where \( x \) and \( y \) are in meters. The speed of the particle is 2 m/s. When the particle attains the lowest \( y \)-coordinate, the acceleration of the particle is (in \( \text{m/s}^2 \)):
- KCET - 2025
- Physics
- Friction
- The minimum force required to start pushing a body up a rough (having coefficient of friction \( \mu \)) inclined plane is \( F_1 \), while the minimum force needed to prevent it from sliding is \( F_2 \). If the inclined plane makes an angle \( \theta \) with the horizontal such that \( \tan\theta = 2\mu \), then the ratio \( \frac{F_1}{F_2} \) is:
- WBJEE - 2025
- Physics
- Friction
- There are two inclined surfaces of equal length inclined at an angle of \(45^\circ\) with the horizontal. One of them is rough and the other is perfectly smooth. A given body takes 2 times as much time to slide down on the rough surface than on the smooth surface. The coefficient of kinetic friction (\(\mu_k\)) between the object and the rough surface is close to :
View More Questions
Questions Asked in AP EAPCET exam
- In a series LCR circuit, the voltages across the capacitor, resistor, and inductor are in the ratio 2:3:6. If the voltage of the source in the circuit is 240 V, then the voltage across the inductor is
- AP EAPCET - 2025
- Electromagnetic induction
- 0.25 moles of $ \text{CH}_2\text{FCOOH} $ was dissolved in $ 0.5 \, \text{kg} $ of water. The depression in freezing point of the resultant solution was observed as $ 1^\circ \text{C} $. What is the van't Hoff factor? ($ K_f = 1.86 \, \text{K kg mol}^{-1} $)
- AP EAPCET - 2025
- Colligative Properties
- At $T(K)$, the vapor pressure of water is $x$ kPa. What is the vapor pressure (in kPa) of 1 molal solution containing non-volatile solute?
- AP EAPCET - 2025
- Colligative Properties
- At 300 K, vapour pressure of pure liquid A is 70 mm Hg. It forms an ideal solution with liquid B. Mole fraction of B = 0.2 and total vapour pressure of solution = 84 mm Hg. What is vapour pressure (in mm) of pure B?
- AP EAPCET - 2025
- Colligative Properties
- A 1% (w/v) aqueous solution of a certain solute is isotonic with a 3% (w/v) solution of glucose (molar mass 180 g mol$^{-1}$). The molar mass of solute (in g mol$^{-1}$) is
- AP EAPCET - 2025
- Colligative Properties
View More Questions