Question:
A Carnot engine working between 300 K and 600 K has a work output of 800 joules per cycle. The amount of heat energy supplied from the source to the engine in each cycle is
A Carnot engine working between 300 K and 600 K has a work output of 800 joules per cycle. The amount of heat energy supplied from the source to the engine in each cycle is
Updated On: Jun 14, 2022
- 6400 joule
- 1600 joule
- 3200 joule
- 800 joule
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
: Efficiency $ =\frac{output}{input}=1-\frac{{{T}_{2}}}{{{T}_{1}}} $ Or $ \frac{800}{input}=1-\frac{300}{600}\Rightarrow \frac{800}{input}=\frac{1}{2} $ Or $ input=1600J $
Was this answer helpful?
0
0
Top Questions on carnot cycle
- The P-V diagram of a Carnot's engine is shown in the graph below. The engine uses 1 mole of an ideal gas as working substance. From the graph, the area enclosed by the P-V diagram is
[ The heat supplied to the gas is 8000 J ]
- KCET - 2023
- Physics
- carnot cycle
- A Carnot engine operating between two reservoirs has efficiency $\frac{1}{3}$ When the temperature of cold reservoir raised by $x$, its efficiency decreases to $\frac{1}{6}$ The value of $x$, if the temperature of hot reservoir is $99^{\circ} C$, will be :
- JEE Main - 2023
- Physics
- carnot cycle
- A Carnot engine whose heat sinks at 27°C, has an efficiency of 25%. By how many degrees should the temperature of the source be changed to increase the efficiency by 100% of the original efficiency?
- JEE Main - 2022
- Physics
- carnot cycle
In 1st case, Carnot engine operates between temperatures 300 K and 100 K. In 2nd case, as shown in the figure, a combination of two engines is used. The efficiency of this combination (in 2nd case) will be:
Fig. - JEE Main - 2022
- Physics
- carnot cycle
- A geyser heats water flowing at a rate of 2.0 kg per minute from 30°C to 70°C. If geyser operates on a gas burner, the rate of combustion of fuel will be __________ g min–1.
[Heat of combustion = 8 × 103 Jg–1, Specific heat of water = 4.2 Jg–1 °C–1]- JEE Main - 2022
- Physics
- carnot cycle
View More Questions
Questions Asked in AMUEEE exam
- The ratio of the half-life time $ (t_{1/2}) $ , to the three quarter life-time, $ (t_{3/4}) $ , for a reaction that is second order
- AMUEEE - 2018
- Order of Reaction
- $ 0.002\, M $ solution of a weak acid has an equivalent conductance $ (\wedge) 60\, ohm^{-1}\, cm^{2}\, eq^{-1} $ . What will be the $ pH $ ? (Given : $ \wedge = 400 \, ohm^{-1} \, cm^{2} \, eq^{-1} $ ]
- AMUEEE - 2018
- Electrochemistry
- The electrode potential, $ E^{\circ} $ , for the reduction of $ MnO^{-}_{4} $ to $ Mn^{2+} $ in acidic medium is $ +1.51\, V $ . Which of the following metal(s) will be oxidised? The reduction reactions and standard electrode potentials for $ Zn^{2+}, Ag^{+} $ , and $ Au^{+} $ are given as $ Zn^{2+} (aq) +2e \to Zn(s), E^{\circ} = -0.762\, V $ $ Ag+ (aq) +e {\rightleftharpoons} Ag (s), E^{\circ}=+0.80 \,V $ $ Au^{+} (aq) +e {\rightleftharpoons} Au(s), E^{\circ}+1.69\,V $
- AMUEEE - 2018
- Electrochemistry
- Three particles, two with masses $ m $ and one with mass $ M $ , might be arranged in any of the four configurations shown below. Rank the configurations according to the magnitude of the gravitational force on $ M $ , least to greatest
- AMUEEE - 2018
- Gravitation
- The $ EAN $ value $ y \left[Ti\left(\sigma-C_{6}H_{5}\right)_{2}\left(\pi-C_{5}H_{5}\right)_{2}\right]^{0} $ is
- AMUEEE - 2018
- coordination compounds
View More Questions
Concepts Used:
Carnot Cycle
Carnot's Theorem:
From the second law of thermodynamics, two important results are derived where the conclusions are taken together to constitute Carnot’s theorem. It may be stated in the following forms.
- ‘No engine can be more efficient than a perfectly reversible engine working between the same two temperatures’.
- ‘The efficiency of all reversible engines, working between the same two temperatures is the same, whatever the working substances’.
Carnot’s Ideal Heat Engine
- A cylinder having perfectly non-conducting walls, a perfectly conducting base and is provided with a perfectly non-conducting piston which moves without friction in the cylinder. The cylinder contains one mole of perfect gas as the working substance.
- Source: A reservoir maintained at a constant temperature T1 from which the engine can draw heat by perfect conduction. It has an infinite thermal capacity and any amount of heat can be drawn from it at constant temperature T1.
- Heat insulating stand. A perfectly mom-conducting platform acts as a stand for adiabatic processes.
- Sink: A reservoir maintained at a constant lower temperature T2 (T2 < T1) to which the heat engine can reject any amount of heat. The thermal capacity of sink is infinite so that its temperature remains constant at T2, no matter how much heat is given to it.