List of top Engineering Graphics Questions asked in Common University Entrance Test
>
Common University Entrance Test
>
Engineering Graphics
List of top Engineering Graphics Questions asked in Common University Entrance Test
The total length of a bolt does not include its____
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Bolts – Square head
The value of outer diameter of a plain washer for a bolt nominal diameter 24 mm is____.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Bolts – Square head
_____ is the diameter of the chamfered circle of a square nut used for bolt of size M30.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Nuts – Square head
Choose the correct option as per the given figure:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Technical Drawing
How many rectangular faces are there in the given figure:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Technical Drawing
Choose the correct option as per the given figure:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Technical Drawing
If pitch is ‘P’ in B.S.W. thread, then the value of ‘d’ (d=Actual Depth) will be ____.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Introduction of threads
In a screw thread, theoretical depth (D) of the thread will be equal to ____
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Standard profiles of screw threads
Choose the correct option as per the given figure:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Technical Drawing
Choose the correct option as per the given figure:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Technical Drawing
The isometric projection of an object is ____ view projection.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Types of Projection
A solid having two bases and rectangular faces is_____.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Projections of Solids
In perspective projection, object appears to converge at a point, called____.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Types of Projection
The isometric scale is used to obtain the ____ of the edges of any object to draw its isometric projection.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Isometric Projection
The view that gives inside details of an object is____.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
View factors
Match List - I with List - II.
List - I
List -II
(Details of collar stud)
(Standard dimension)
(Where 'd' is nomial diameter of stud)
(A) Threaded length of nut end
(I) d
(B)Diameter of collar
(II) 0.4 d
(C)Thickness of collar
(III) 1.5 d
(D)Length of metal end
(IV) 2 d+6
Choose the
correct
answer from the options given below:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Dimensions of Development
Match List - I with List - II.
(Thread of P = Pitch, d= Actual depth and D=Theoretical depth)
List - I
List -II
(A) B.S.W. Thread
(I) d = 0.61 P
(B)Metric thread (internal)
(II) D = 0.96 P
(C)Metric thread (external)
(III) d = 0.54 P
(D) Square thread
(IV) D= 0.50 P
Choose the
correct
answer from the options given below:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Threads Profiles
Match List - I with List - II.
List - I
List -II
(Assemblies)
(Number of parts used)
(A) Open Bearing
(I) 5
(B)Sleeve and cotter join
(II) 4
(C)Gib and cotter joint
(III) 3
(D)Turnbuckle
(IV) 2
Choose the
correct
answer from the options given below:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Assembly and Dis-assembly
Match List - I with List - II.
List - I
List -II
(A)Pipes are used to carry.
(I) By means of nut and Bolt
(B)Faces of flanges are machined at right angles to the axis of pipe
(II) For preventing leakage
(C)Gasket is used in between faces of two flanges.
(III) For perfect alignments
(D)Flanges with gasket in between are connected together.
(IV) water, oil, steam or gas etc. from one place to another place
Choose the
correct
answer from the options given below:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Flange pipe joint
Choose the incorrect statement for Sleeve and cotter joint :
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Joints
Turnbuckle joint is not used in _____.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Joints
In flange pipe joint, both flanges with gasket in between them are connected together by____.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Joints
Match List - I with List - II.
List - I
List -II
(Solids)
(Their Features)
(A) Prism
(I) Base is a circle.
(B) Pyramid
(II) Two similar ends and rectangular faces.
(C) Cone
(III) Two circular faces and one curved surface.
(D) Cylinder
(IV) One base and slant triangular faces.
Choose the
correct
answer from the options given below:
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Faces, Edges And Vertices
Shape of oil hole in Bush Bearing is__________.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Shape Factor
In Gib and cotter joint, if the thickness of cotter is 8 mm, then thickness of gib will be______.
CUET (UG) - 2023
CUET (UG)
Engineering Graphics
Cotter joints for square rods
Prev
1
2
3
4
5
Next