>
Andhra Pradesh Post Graduate Engineering Common Entrance Test
>
Chemical Engineering
List of top Chemical Engineering Questions asked in Andhra Pradesh Post Graduate Engineering Common Entrance Test
Pick the best difference between mixing and blending.
AP PGECET - 2025
AP PGECET
Chemical Engineering
Chemical Engineering
For transportation of boiler ash, which one of the following conveyors will be useful?
AP PGECET - 2025
AP PGECET
Chemical Engineering
Chemical Engineering
If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase is known, then the latent heat of fusion can be calculated by the:
AP PGECET - 2025
AP PGECET
Chemical Engineering
Thermodynamics
Which of the following equation must be perfunctorily satisfied while dealing with fluid flow problems?
AP PGECET - 2025
AP PGECET
Chemical Engineering
Fluid Mechanics
The theoretical minimum work required to separate one mole of a liquid mixture at 1 atm, containing 50 mole % each of n-heptane and n-octane into pure compounds, each at 1 atm, is:
AP PGECET - 2025
AP PGECET
Chemical Engineering
Thermodynamics
Design an approach to estimate the activity coefficient of a component in a non-ideal liquid mixture:
AP PGECET - 2025
AP PGECET
Chemical Engineering
Thermodynamics
The absolute humidity of air at 101.325 kPa is measured to be 0.02 kg of water per kg of dry air. Then the partial pressure of water vapour in the air is:
AP PGECET - 2025
AP PGECET
Chemical Engineering
Thermodynamics
The minimum amount of work required to operate a refrigerator which removes 1000 Cal heat at $0^\circ$C and rejects at $50^\circ$C will be:
AP PGECET - 2025
AP PGECET
Chemical Engineering
Thermodynamics
The entropy of single crystalline Silicon at absolute zero will be:
AP PGECET - 2025
AP PGECET
Chemical Engineering
Thermodynamics
For identical feed comp., flow rate, conversion and for all positive reaction orders the ratio of the volume of mixed reactor to the volume of plug flow reactor
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
In a semi-batch reactor
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
The best combination of reactors for an exothermic reaction is:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
If the conversion of a first-order liquid phase reaction occurring in a CSTR is 75%, molar feed rate is 5 mol/min, the rate of the reaction is 5 $\frac{mol}{litre \cdot min}$ then the volume of the reactor (in litre) is?
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
If $ \tau = 5 $ s, first order rate constant, $ k = 0.25 $ sec$^{-1}$ and the number of tanks, $ N $ is 5, then the conversion is
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
Which of the following is true for gas-phase reactions?
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
Which of the following represents heterogeneous catalytic reaction?
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
What is the activity of a catalyst when a time $ t = 0 $?
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
The mass of material that can be fed per unit time to a unit area of the screen is called as
AP PGECET - 2024
AP PGECET
Chemical Engineering
Fluid Mechanics
100-mesh screen means
AP PGECET - 2024
AP PGECET
Chemical Engineering
Fluid Mechanics
In which of the following pumps, the displacement of fluid is by rotating action
AP PGECET - 2024
AP PGECET
Chemical Engineering
Fluid Mechanics
Kozney Carman equation is used for finding
AP PGECET - 2024
AP PGECET
Chemical Engineering
Fluid Mechanics
The flow of incompressible fluids without the presence of shear is referred to as
AP PGECET - 2024
AP PGECET
Chemical Engineering
Fluid Mechanics
For an ideal gas mixture, the fugacity of a component is equal to
AP PGECET - 2024
AP PGECET
Chemical Engineering
Process Calculations and Thermodynamics
When the reactants and products are at their standard states, the change in enthalpy accompanying the formation of 1 mole of a substance from the constituent elements is termed as:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Process Calculations and Thermodynamics
Entropy of a system is:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Process Calculations and Thermodynamics
Prev
1
...
3
4
5
6
7
...
9
Next