List of top Questions asked in Telangana State Post Graduate Engineering Common Entrance Test

When the degree of saturation is zero, the soil mass under consideration represents
The minimum headroom over a stair must be
The span to overall depth ratio of a simply supported two-way slab with mild steel reinforcement is
The minimum thickness of the web in a plate girder, when the plate is accessible and also exposed to weather is
The use of tie plates in laced columns is:
The least permissible clear dimension of the web of thickness $ t $ in the panel of a plate girder is restricted to
What is the net sectional area of a steel plate 40 cm wide and 10 mm thick with one bolt, if the diameter of the bolt hole is 18 mm?
Options:
Age of a tree may be ascertained by
Which chemical process is responsible for the long-term strength gain of concrete?
Which one of the following relates to determination of critical path in PERT?
In PERT analysis, the time estimates of activities and probability of their occurrence follow
The maximum area of tension reinforcement in beams shall not exceed ____ of the total area.
Cantilever retaining walls can safely be used for a height not more than:
Maximum distance between expansion joints in structures as per IS: 456–2000 is:
In the simple bending theory, the stress distribution assumed across the cross-section of a beam is:

Choose the correct option for the structure shown below.

If the deflection at the free end of a uniformly loaded cantilever beam is 15mm and the slope of the deflection curve at the free end is 0.02 radian, then the length of the beam is
The displacement method is also referred to as
Which statement best describes the role of carryover factors in the Moment Distribution Method?
A tennis player returns a ball by hitting it with a racket. If the force exerted by the racket on the ball is increased, then the impulse imparted to the ball:
Radius of gyration is that distance which when squared and multiplied with total mass of the body gives
In the stress-strain curve of a ductile material, the point at which the material begins to deform plastically is known as
What is the ratio of maximum shear stress to average shear stress for a circular section?
In the simple bending theory, the stress distribution assumed across the cross-section of a beam is
A steel column has a length of 4 meters and a square cross-section with moment of inertia $1.6 \times 10^{-4} \text{ m}^4$. If the column is pinned at both ends and the modulus of elasticity of steel is 200 GPa, what is the critical buckling load? (take $\pi^2$ value as 10)