List of top Questions asked in Tamil Nadu Common Entrance Test

The gear A of 20 teeth meshes with gear B of 10 teeth that is compounded to wheel C of 30 teeth that meshes with gear D of 10 teeth. The velocity ratio between gear D and gear A is
A mill spinning 40° Ne carded yarn with the following fiber properties. Find the Fiber Quality Index? \( 2.5% \text{ S.L } = 28 \text{ mm} \) Uniformity ratio = 0.47 Micronaire value = 4.3 Bundle strength (g/tex) = 22.5 Maturity ratio = 0.80
The glass transition temperature of polyester is
Convolution count of a cotton fibre is defined as
Among the following systems of drafting, the objective of which is to reduce the friction between adjacent warp ends?
The temperature of the air in melt blown process is set close to ________ of the polymer.
Which of the following fibers can be used for manufacturing of absorbent core based nonwoven products?
In Weft knitting machine, the term 'Robbing back' is
If the weight of a sample of cotton decreases from 107.5 to 100 grams when heated at 105 °C for 2 hours. The Moisture Content and Regain is
Crimp interchange is a phenomena associated with
The paper-based substrate is called as
Match the correct pressure for the respective process 
Printing Method
The selling price of the product is determined by adding
What is the formula to calculate Budgeted hourly rate?
An opening device made of plastic normally fitted to lined carton is called as
The exposure given to cure both imaging and non-imaging areas of a flexo plate to make it tack free.
Angle of incidence is
The dot shape suitable for newspaper printing is
Antioxidants are added to oils and fats to protect
10 points = _________ mm
Postscript font uses __________ to describe the characters
A series of small holes very close to each other is made so that a position of the sheet of paper may be readily torn away and this operation is called
How do you calculate water activity where P is vapor pressure of food and P₀ is vapor pressure of pure water?
VCI films are used to avoid __________ of automotive packaging
The arrangement of the visual elements is