Question:
Your friend is having eye sight problem. She is not able to see clearly a distant uniform window mesh and it appears to her as non-uniform and distorted. The doctor diagnosed the problem as :
Your friend is having eye sight problem. She is not able to see clearly a distant uniform window mesh and it appears to her as non-uniform and distorted. The doctor diagnosed the problem as :
Show Hint
Myopia is corrected by concave lenses; Astigmatism is corrected by cylindrical lenses.
Updated On: Jan 31, 2026
- Myopia and hypermetropia
- Presbyopia with Astigmatism
- Astigmatism
- Myopia with Astigmatism
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Step 1: Inability to see distant objects clearly indicates **Myopia**.
Step 2: The distortion of a uniform mesh (lines in different directions appearing differently) is the classic symptom of **Astigmatism**, caused by irregular curvature of the cornea.
Step 3: Therefore, the friend has both Myopia and Astigmatism.
Step 2: The distortion of a uniform mesh (lines in different directions appearing differently) is the classic symptom of **Astigmatism**, caused by irregular curvature of the cornea.
Step 3: Therefore, the friend has both Myopia and Astigmatism.
Was this answer helpful?
0
0
Top Questions on Ray optics and optical instruments
- Five persons \(P_1, P_2, P_3, P_4\) and \(P_5\) recorded object distance (\(u\)) and image distance (\(v\)) using same convex lens having power \(+5\) D as (25,96), (30,62), (35,37), (45,35) and (50,32) respectively. Identify correct statement.
- JEE Main - 2026
- Physics
- Ray optics and optical instruments
- In a microscope, the objective has a focal length \(f_o=2\) cm and the eye-piece has a focal length \(f_e=4\) cm. The tube length is 32 cm. The magnification produced by this microscope for normal adjustment is_____.
- JEE Main - 2026
- Physics
- Ray optics and optical instruments
- In parallax method for the determination of focal length of a concave mirror, the object should always be placed:
- JEE Main - 2026
- Physics
- Ray optics and optical instruments
- A prism of angle $75^\circ$ and refractive index $\sqrt{3}$ is coated with thin film of refractive index 1.5 only at the back exit surface. To have total internal reflection at the back exit surface the incident angle angle must be ___. ($\sin 15^\circ = 0.25$ and $\sin 25^\circ = 0.43$)}
- JEE Main - 2026
- Physics
- Ray optics and optical instruments
- Given below are two statements :
Statement I : In a Young's double slit experiment, the angular separation of fringes will increase as the screen is moved away from the plane of the slits
Statement II : In a Young's double slit experiment, the angular separation of fringes will increase when monochromatic source is replaced by another monochromatic source of higher wavelength
In the light of the above statements, choose the correct answer from the options given below :- JEE Main - 2026
- Physics
- Ray optics and optical instruments
View More Questions
Questions Asked in JEE Main exam
- If the distances of the point \( (1,2,a) \) from the line \[ \frac{x-1}{1}=\frac{y}{2}=\frac{z-1}{1} \] along the lines \[ L_1:\ \frac{x-1}{3}=\frac{y-2}{4}=\frac{z-a}{b} \quad \text{and} \quad L_2:\ \frac{x-1}{1}=\frac{y-2}{4}=\frac{z-a}{c} \] are equal, then \( a+b+c \) is equal to:
- JEE Main - 2026
- Three Dimensional Geometry
Two circular discs of radius \(10\) cm each are joined at their centres by a rod, as shown in the figure. The length of the rod is \(30\) cm and its mass is \(600\) g. The mass of each disc is also \(600\) g. If the applied torque between the two discs is \(43\times10^{-7}\) dyne·cm, then the angular acceleration of the system about the given axis \(AB\) is ________ rad s\(^{-2}\).
- JEE Main - 2026
- Rotational motion
- In an experiment, a set of readings are obtained as follows: \[ 1.24~\text{mm},\ 1.25~\text{mm},\ 1.23~\text{mm},\ 1.21~\text{mm}. \] The expected least count of the instrument used in recording these readings is _______ mm.
- JEE Main - 2026
- General Physics
Method used for separation of mixture of products (B and C) obtained in the following reaction is:
- JEE Main - 2026
- p -Block Elements
- The number of numbers greater than $5000$, less than $9000$ and divisible by $3$, that can be formed using the digits $0,1,2,5,9$, if repetition of digits is allowed, is
- JEE Main - 2026
- Permutations
View More Questions