Question:
Which of the following is not a principal classification model representing the 3D geometric modelling?
Which of the following is not a principal classification model representing the 3D geometric modelling?
Show Hint
When working with 3D modeling, always consider the dimensions of the objects you are dealing with: lines are 1D, surfaces are 2D, and volumes represent 3D objects.
Updated On: Feb 10, 2025
- Line
- Surface
- Primitives
- Volume
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
In 3D geometric modelling, classification models are typically based on volumes, surfaces, or primitives. A line is a 1D object, whereas the other options (surface, primitives, and volume) represent 3D shapes and models. Hence, the correct answer is Line.
Was this answer helpful?
0
0
Top Questions on CAD/CAM
- Calculate the matrix product \( C = AB \), where
\[A = \begin{bmatrix} 5 & 3 & 1 \\ 4 & 6 & 2 \\ 10 & 3 & 4 \end{bmatrix}, \quad B = \begin{bmatrix} 1 & 5 \\ 2 & 4 \\ 3 & 2 \end{bmatrix}\] - The application for which a point to point numerical control system can be employed is a
- For maintaining records, —––––––––– cards contain information on the (a) type of part, (b) location where the card was issued, (c) part number, and (d) number of items in the container.
Questions Asked in TANCET exam
- The centrifugal force (N) acting on a material mass 2g present at the tip of a beater of radius 25 cm rotating at 600 rpm is
- TANCET - 2024
- Yarn Engineering
- Select the correct match
- TANCET - 2024
- Yarn Engineering
- Two yarns of count X each are doubled and plied. The ratio of resultant count of two ply yarn expressed in tex system and Ne system is_______. Neglect contraction due to twist.
- TANCET - 2024
- Yarn Engineering
- A reed has 15 dents/cm, and the warp is drawn in two ends per dent. If the finished fabric is 1.4 m wide compared with 1.47 m wide in the reed, what is the finished fabric sett?
- TANCET - 2024
- Fabric Engineering
- Among the following systems of drafting, the objective of which is to reduce the friction between adjacent warp ends?
- TANCET - 2024
- Fabric Engineering
View More Questions