What is the value of inductance $L$ for which the current is maximum in a series $LCR$ circuit with $C=10 \, \mu F $ and $ \omega=1000 \, S^{-1}$ ?
- 1 mH
- cannot be calculated unless R is known
- 10 mH
- 100 mH.
The Correct Option is D
Solution and Explanation
$\Rightarrow \omega^{2}=\frac{1}{L C} $
$\Rightarrow L=\frac{1}{\omega^{2} C}$
$=\frac{1}{(1000)^{2}\left(10 \times 10^{-6}\right)}=0.1 \,H$
$ =100\, mH$
Top Questions on LCR Circuit
- A sinusoidal voltage produced by an AC generator at any instant \( t \) is given by an equation \( V = 311 \sin (314t) \). The rms value of voltage and frequency are respectively
- KCET - 2025
- Physics
- LCR Circuit
Find output voltage in the given circuit.
- JEE Main - 2025
- Physics
- LCR Circuit
- The amplitude of the charge oscillating in a circuit decreases exponentially as $Q = Q_0 e^{-Rt/2L}$, where $Q_0$ is the charge at $t=0s$. The time at which charge amplitude decreases to 0.50 $Q_0$ is nearly:
[Given that $R = 15 \Omega$, $L = 12 mH$, $ln(2) = 0.693$]- NEET (UG) - 2024
- Physics
- LCR Circuit
- A logic circuit provides the output y as per the following truth table:
A B Y 0 0 1 0 1 0 1 0 1 1 1 0
The expression for the output Y is:- NEET (UG) - 2024
- Physics
- LCR Circuit
- In an LCR series circuit, the value of only capacitance \( C \) is varied. The resulting variation of resonance frequency \( f_0 \) as a function of \( C \) can be represented as
- KCET - 2024
- Physics
- LCR Circuit
Questions Asked in NEET exam
In a Vernier caliper, \(N+1\) divisions of vernier scale coincide with \(N\) divisions of main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is:
- NEET (UG) - 2024
- Units, Dimensions and Measurements
- In an ecosystem if the Net Primary Productivity (NPP) of first trophic level is 100x (kcal m-2)yr-1, what would be the GPP (Gross Primary Productivity) of the third trophic level of the same ecosystem?
- NEET (UG) - 2024
- Ecosystems
- Two bodies A and B of same mass undergo completely inelastic one dimensional collision. The body A moves with velocity v1 while body B is at rest before collision. The velocity of the system after collision is v2. The ratio v1 : v2 is :
- NEET (UG) - 2024
- Average Velocity and Instantaneous Velocity
- A bob is whirled in a horizontal plane by means of a string with an initial speed of ω rpm. The tension in the string is T. If speed becomes 2ω while keeping the same radius, the tension in the string becomes:
Identify the major product C formed in the following reaction sequence:
- NEET (UG) - 2024
- Chemical Reactions
Concepts Used:
LCR Circuit
An LCR circuit, also known as a resonant circuit, or an RLC circuit, is an electrical circuit consist of an inductor (L), capacitor (C) and resistor (R) connected in series or parallel.
Series LCR circuit
When a constant voltage source is connected across a resistor a current is induced in it. This current has a unique direction and flows from the negative to positive terminal. Magnitude of current remains constant.
Alternating current is the current if the direction of current through this resistor changes periodically. An AC generator or AC dynamo can be used as AC voltage source.
