The Prandtl number is the
Show Hint
- Ratio of kinematic viscosity to thermal diffusivity
- Ratio of thermal diffusivity to kinematic viscosity
- Product of thermal diffusivity and kinematic viscosity
- Ratio of absolute viscosity to thermal conductivity
The Correct Option is B
Solution and Explanation
Top Questions on Heat Transfer
One mole of an ideal gas at 300 K is compressed isothermally from a volume of \(V_1\) to \(V_2\). Calculate:
The work done on the gas
The change in internal energy
The heat exchanged with the surroundings
Use \(R = 8.314\, \text{J/molK}\), \( \ln(2.5) = 0.916\)- AP EAPCET - 2025
- Physics
- Heat Transfer
Three conductors of same length having thermal conductivity \(k_1\), \(k_2\), and \(k_3\) are connected as shown in figure. Area of cross sections of 1st and 2nd conductor are same and for 3rd conductor it is double of the 1st conductor. The temperatures are given in the figure. In steady state condition, the value of θ is ________ °C. (Given: \(k_1\) = 60 Js⁻¹m⁻¹K⁻¹,\(k_2\) = 120 Js⁻¹m⁻¹K⁻¹, \(k_3\) = 135 Js⁻¹m⁻¹K⁻¹)
- JEE Main - 2025
- Physics
- Heat Transfer
- Two spherical bodies of same materials having radii 0.2 m and 0.8 m are placed in same atmosphere. The temperature of the smaller body is 800 K and temperature of bigger body is 400 K. If the energy radiate from the smaller body is E, the energy radiated from the bigger body is (assume, effect of the surrounding to be negligible):
- JEE Main - 2025
- Physics
- Heat Transfer
- Two cylindrical rods A and B made of different materials, are joined in a straight line. The ratio of lengths, radii and thermal conductivities of these rods are : $ \frac{L_A}{L_B} = \frac{1}{2} $, $ \frac{r_A}{r_B} = 2 $, and $ \frac{K_A}{K_B} = \frac{1}{2} $. The free ends of rods A and B are maintained at $ 400 \, K $, $ 200 \, K $, respectively. The temperature of rods interface is ____ K, when equilibrium is established.
- JEE Main - 2025
- Physics
- Heat Transfer
- A wire of length 10 cm and diameter 0.5 mm is used in a bulb. The temperature of the wire is 1727°C and power radiated by the wire is 94.2 W. Its emissivity is $ \frac{x}{8} $, where $ x = \ldots $
- JEE Main - 2025
- Physics
- Heat Transfer
Questions Asked in TS PGECET exam
When the enable data input \( D = 1 \), select inputs \( S_1 = S_0 = 0 \) in the 1×4 Demultiplexer, then the outputs \( Y_0, Y_1, Y_2, Y_3 \) are
- TS PGECET - 2024
- Analog and Digital Electronics
- The frequency modulation of a 3-\(\phi\) sinusoidal pulse width modulation is an odd multiple of 3. Then the output line voltage contains
- TS PGECET - 2024
- Power Electronics
The \( Z \) parameter \( Z_{21} \) of the following circuit is
- TS PGECET - 2024
- Electric circuits and fields
The \( h \) parameters of the following circuit is
- TS PGECET - 2024
- Electric circuits and fields
For an input voltage \( v = 10 \sin 1000t \), the Thevenin's impedance at the terminals X and Y for the following circuit is
- TS PGECET - 2024
- Electric circuits and fields