The potential difference across the $3 \,\Omega$ resistor shown in figure is
- zero
- 3.5 V
- 1 V
- 7V
The Correct Option is A
Solution and Explanation
Top Questions on Resistance
- A current of 2 A flows through a conductor with a resistance of 5 \(\Omega\). Calculate the potential difference across the conductor.
- MHT CET - 2025
- Physics
- Resistance
- A coil of resistance 10 \( \Omega \) is connected to a battery of 12 V. If the current flowing through the coil is 2 A, what is the power dissipated in the coil?
- BITSAT - 2025
- Physics
- Resistance
- Find the effective resistance of the network of resistors between points A and F as shown in the figure.
- A wire of resistance \( X \, \Omega \) is gradually stretched till its length becomes twice its original length. If its new resistance becomes 40 \( \Omega \), find the value of \( X \).
- A wire of resistance \( R \), connected to an ideal battery, consumes a power \( P \). If the wire is gradually stretched to double its initial length, and connected across the same battery, the power consumed will be:
Questions Asked in AIIMS exam
What is the correct IUPAC name for the following compound?- AIIMS - 2024
- Organic Chemistry - Some Basic Principles and Techniques
What is the major product formed when phenol is treated with sodium dichromate (\( \text{Na}_2\text{Cr}_2\text{O}_7 \)) and sulfuric acid (\( \text{H}_2\text{SO}_4 \))?- AIIMS - 2024
- Organic Chemistry - Some Basic Principles and Techniques
- In a diffraction experiment, the fringe width $ \beta $ is 0.3 mm, the distance from the slit to the screen $ D $ is 5 cm, and the slit width $ d $ is 3 mm. What is the wavelength $ \lambda $?
What is the major product of the reaction?- AIIMS - 2024
- Organic Chemistry - Some Basic Principles and Techniques
- A solenoid has a radius of 10 cm, 200 turns per meter, and carries a current of 2 A. What is its inductance per unit length?
- AIIMS - 2024
- Solenoids and Toroids
Concepts Used:
Resistance
Resistance is the measure of opposition applied by any object to the flow of electric current. A resistor is an electronic constituent that is used in the circuit with the purpose of offering that specific amount of resistance.
R=V/I
In this case,
v = Voltage across its ends
I = Current flowing through it
All materials resist current flow to some degree. They fall into one of two broad categories:
- Conductors: Materials that offer very little resistance where electrons can move easily. Examples: silver, copper, gold and aluminum.
- Insulators: Materials that present high resistance and restrict the flow of electrons. Examples: Rubber, paper, glass, wood and plastic.
Resistance measurements are normally taken to indicate the condition of a component or a circuit.
- The higher the resistance, the lower the current flow. If abnormally high, one possible cause (among many) could be damaged conductors due to burning or corrosion. All conductors give off some degree of heat, so overheating is an issue often associated with resistance.
- The lower the resistance, the higher the current flow. Possible causes: insulators damaged by moisture or overheating.