Question:
The inline perfect printing, for work-and-turn needs gripper margins at
The inline perfect printing, for work-and-turn needs gripper margins at
Show Hint
Proper gripper margins ensure print accuracy in two-sided (work-and-turn) printing.
Updated On: Feb 27, 2025
- Both lead and left edge
- Both lead and trail edge
- Both lead and right edge
- Only one edge
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
In work-and-turn printing, both the lead edge and the trail edge require gripper margins to maintain accurate registration. This ensures consistent alignment when flipping the sheet for the second pass. Proper gripper margins help maintain print quality and prevent alignment issues during double-sided printing.
Was this answer helpful?
0
0
Top Questions on Prepress
Questions Asked in TANCET exam
- What letter replaces the question mark?
- An intermediate shaft of a gearbox, supporting two spur gears A and B and mounted between two bearings C1 and C2, is shown in the below figure. The pitch circle diameters of gears A and B are 500 and 250 mm respectively. The shaft is made of alloy steel 20MnCr5. (\( S_{ut} = 620 \) and \( S_{yt} = 480 \) N/mm\(^2\)). The factors \( k_b \) and \( k_t \) of the ASME code are 2 and 1.5 respectively. The gears are keyed to the shaft. Determine the shaft diameter using the ASME code.
- TANCET - 2024
- Machine Design
- A train moving at 108 km/hr crosses a platform in 30 seconds. Then it crosses a man running at 12 km/hr in the same direction in 9 seconds. What is the length of train and platform in m?
- TANCET - 2024
- Time, Speed and Distance
- The speed of a motor boat in still water is 7km/hr. If the speed of the motor boat against the stream is 5 km/hr, what is the speed of the stream?
- TANCET - 2024
- Time, Speed and Distance
A closed-loop system has the characteristic equation given by: $ s^3 + k s^2 + (k+2) s + 3 = 0 $.
For the system to be stable, the value of $ k $ is:- TANCET - 2024
- Microprocessors
View More Questions