Question

The general rule of drawing order of ends in a Reed for any weave is

• A. 2 ends / dent
• B. 3 ends / dent
• C. 4 ends / dent
• D. 1 ends / dent

Hint:

• Ends per dent} (sleying pattern) is the number of warp yarns drawn through each space in the reed.
• Common patterns are 1, 2, 3, or 4 ends per dent.
• 2 ends per dent} is a very common and widely used practice for a broad range of fabric constructions. It's often considered the "standard" or most general sleying.
• The choice depends on target EPI, yarn count, and weave structure.

Answer 1

The Correct Option is A

In textile engineering, specifically in the context of weaving, the drawing order of ends in a reed is an essential aspect of the weaving preparation process. The reed is a comb-like device used in a loom to separate and evenly space the warp threads, impacting the fabric's density and texture. When discussing the general rule for the drawing order of ends, the term "ends" refers to the individual warp threads, and "dent" refers to the spaces between the reed's wires.

The correct drawing order for most standard weaves, such as plain weave, twill, and others, is typically 2 ends/dent. This is because:

• It maintains a balance in warp tension and fabric density.
• It facilitates easier management of warp threads during the weaving process.
• It is a commonly accepted standard that provides a good compromise between fabric strength and flexibility.

Thus, for the general rule of drawing order of ends in a reed for any weave, the correct option is 2 ends / dent.