The following statements refer to the pole-zero configuration for compensator networks:
I. In lag network, pole is nearer to origin
II. In lag network, zero is nearer to origin
III. In lead network, zero is nearer to origin
IV. In lead network, pole is nearer to origin
Choose the correct combination:
II. In lag network, zero is nearer to origin
III. In lead network, zero is nearer to origin
IV. In lead network, pole is nearer to origin
Choose the correct combination:
Show Hint
- Only I is correct
- Only III is correct
- Only I & II are correct
- Only III & IV are correct
The Correct Option is D
Solution and Explanation
- In a lag compensator, pole is closer to origin than zero.
Hence, only statements III and IV are true.
Top Questions on Control Systems
A feedback control system is shown in the figure.
The maximum allowable value of \( n \) such that the output \( y(t) \), due to any step disturbance signal \( d(t) \), becomes zero at steady-state, is ________ (in integer).
- GATE IN - 2025
- Control Systems
- Control Systems
The plant in the feedback control system shown in the figure is \( P(s) = \frac{a}{s^2 - b^2} \), where \( a > 0 \) and \( b > 0 \). The type(s) of controller \( C(s) \) that CANNOT stabilize the plant is/are
- GATE IN - 2025
- Control Systems
- Control Systems
- The figure shows a closed-loop system with a plant \(G(s) = \frac{1}{s^2}\) and a lead compensator \(C(s)\). The compensator is designed to place the dominant closed-loop poles at \(-1.5 \pm j\frac{\sqrt{27}}{2}\). From the following options, choose the phase lead that the compensator needs to contribute.
- GATE IN - 2025
- Control Systems
- Control Systems
Consider the control system block diagram given in Figure (a). The loop transfer function $G(s)H(s)$ does not have any pole on the $j\omega$-axis. The counterclockwise contour with infinite radius, as shown in Figure (b), encircles two poles of $G(s)H(s)$. Choose the correct statement from the following options for closed loop stability of the system.
- GATE IN - 2025
- Control Systems
- Control Systems
- For the transfer function \( G(s) = 1 + \frac{2s - 1}{s^3 + 5s^2 + 3s + 22} \), the number of zeros lying in the left half of the \( s \)-plane is
- GATE IN - 2025
- Control Systems
- Control Systems
Questions Asked in TS PGECET exam
When the enable data input \( D = 1 \), select inputs \( S_1 = S_0 = 0 \) in the 1×4 Demultiplexer, then the outputs \( Y_0, Y_1, Y_2, Y_3 \) are
- TS PGECET - 2024
- Analog and Digital Electronics
- The frequency modulation of a 3-\(\phi\) sinusoidal pulse width modulation is an odd multiple of 3. Then the output line voltage contains
- TS PGECET - 2024
- Power Electronics
The \( Z \) parameter \( Z_{21} \) of the following circuit is
- TS PGECET - 2024
- Electric circuits and fields
The \( h \) parameters of the following circuit is
- TS PGECET - 2024
- Electric circuits and fields
For an input voltage \( v = 10 \sin 1000t \), the Thevenin's impedance at the terminals X and Y for the following circuit is
- TS PGECET - 2024
- Electric circuits and fields