The energy that will be ideally radiated by a 100 kW transmitter in 1 hour is:
- 36 x 107J
- 36 x 104J
- 36 x 105J
- 1 x 105J
The Correct Option is A
Solution and Explanation
To find the energy radiated by a 100 kW transmitter in 1 hour, we use the formula for energy: E = P × t, where P is power and t is time.
Step 1: Identify the given values.
- Power, P = 100 kW = 100,000 watts
- Time, t = 1 hour = 3600 seconds
Step 2: Substitute the values into the formula.
E = 100,000 W × 3600 s
E = 360,000,000 J
Step 3: Convert the energy into scientific notation.
E = 3.6 × 108 J
Step 4: Match with provided options.
The correct answer is 36 × 107 J, which is equivalent to 3.6 × 108 J.
Top Questions on thermal properties of matter
- A 200 g sample of water at 80°C is mixed with 100 g of water at 20°C. Assuming no heat loss to the surroundings, what is the final temperature of the mixture?
- MHT CET - 2025
- Physics
- thermal properties of matter
- The resistance of a wire at 25°C is 10.0 \( \Omega \). When heated to 125°C, its resistance becomes 10.5 \( \Omega \). Find (i) the temperature coefficient of resistance of the wire, and (ii) the resistance of the wire at 425°C.
- CBSE CLASS XII - 2025
- Physics
- thermal properties of matter
- If the longitudinal strain of a stretched wire is 0.2% and the Poisson's ratio of the material of the wire is 0.3, then the volume strain of the wire is
- AP EAPCET - 2025
- Physics
- thermal properties of matter
- Highest limiting conductance at 298 K is:
- KEAM - 2025
- Physics
- thermal properties of matter
- An equiconvex lens of power P is cut perpendicular to its principal axis, into 2 equal parts, power of each part?
- KEAM - 2025
- Physics
- thermal properties of matter
Questions Asked in NEET exam
- Consider the diameter of a spherical object being measured with the help of a Vernier Callipers. Suppose its 10 Vernier Scale Divisions (V.S.D.) are equal to its 9 Main Scale Divisions (M.S.D.). The least count in the M.S. is 0.1 cm and the zero of V.S. is at -0.1 cm when the jaws of Vernier callipers are closed. If the main scale reading for the diameter is \(M = 5\) cm and the number of coinciding vernier division is 8, the measured diameter after zero error correction, is:
- NEET (UG) - 2025
- Measurement of length
- A container has two chambers of volumes \(V_1 = 2\) litres and \(V_2 = 3\) litres separated by a partition made of a thermal insulator. The chambers contain \(n_1 = 2\) moles and \(n_2 = 3\) moles of ideal gas at pressures \(p_1 = 1\) atm and \(p_2 = 2\) atm, respectively. When the partition is removed, the mixture attains an equilibrium pressure of :
- NEET (UG) - 2025
- Ideal Gases
A sphere of radius R is cut from a larger solid sphere of radius 2R as shown in the figure. The ratio of the moment of inertia of the smaller sphere to that of the rest part of the sphere about the Y-axis is :
- NEET (UG) - 2025
- Moment Of Inertia
The current passing through the battery in the given circuit, is:
- NEET (UG) - 2025
- Current electricity
A bob of heavy mass \(m\) is suspended by a light string of length \(l\). The bob is given a horizontal velocity \(v_0\) as shown in figure. If the string gets slack at some point P making an angle \( \theta \) from the horizontal, the ratio of the speed \(v\) of the bob at point P to its initial speed \(v_0\) is :
- NEET (UG) - 2025
- Pendulums
Concepts Used:
Thermal Properties of Matter
Anything that has mass or occupies space in the universe is commonly known as matter. There are five properties of matters namely chemical, mechanical, thermal, dimensional, and physical properties.
Read More: Thermal Properties of Matter
Heat Capacity:
The quantity of heat needed to change the temperature of the matter by 1° is known as the heat capacity of a material. The temperature is indicated in kelvin or Celsius and the amount of heat is shown in calories or joules. Specific heat capacity or molar heat capacity is used to calculate the heat capacity of the matter with the stated dimension.
Linear expansion is the situation when change takes place in one dimension or dimensional.
Thermal Expansion:
When heat is passed through the material, the change in the area, volume, and shape is recognized as the thermal expansion property of the material. The expansion of the railway tracks due to maximal heat which leads to accidents is an example of thermal expansion.
Thermal Conductivity:
This property is interconnected to the conductivity of heat. The amount of heat regulated by the material is directly proportional to the conductivity of the material. Not all objects have the capacity to conduct heat throughout their bodies. Insulators are such objects which do not have the property to conduct heat throughout their body.
Thermal Stress:
The stress due to thermal contraction or expansion of the body is known as thermal stress. The explosion of materials takes place due to thermal stress which is dangerous. The cracks on the truck tyres are caused by an outcome of thermal stress. Trucks at high speed generate heat which is caused by the friction of the truck tyres and the road surface.