The area of the region covered by the TV broadcast by a TV tower of 100 m height is (Radius of the earth = $ 6.4 \times 10^6 \, m $ )
- $ 12.8 \pi \times 10^8 \, km^2 $
- $ 1.28 \pi \times 10^3 \, km^2 $
- $ 0.644 \pi \times 10^3 \, km^2 $
- $ 1.28 \pi \times 10^3 \, km^2 $
The Correct Option is B
Solution and Explanation
A = $ \pi d^2 = \pi \, ( 2hR ) $
Given, $ h = 100 mR = 6.4 \times 10^6 \, m $
$\Rightarrow A = \pi ( 2 \times 100 \times 6.4 \times 10^6 ) $
A = $ 1.28 \pi \times 10^3 \, km^2 $
Top Questions on communication systems
- With reference to the Fast Fourier Transform, if \( W_4^1 = W_x^2 \), then what is the value of \( x \)?
- TANCET - 2024
- Electrical Engineering
- communication systems
- A carrier wave of peak voltage 16 V is used to transmit a message signal. What should be the peak voltage of the modulating signal in order to have a modulation index of 75%?
- AP EAMCET - 2024
- Physics
- communication systems
- A parallel plate capacitor has two plates of area 'A' separated by distance 'd'. The capacitor is charged to a potential difference 'V' and the battery is disconnected. A metal plate with area 'A' and thickness \( \frac{d}{2} \) is inserted between the plates, so that it is always parallel to the plates. The work done on the metal slab while it was inserted is:
- AP EAMCET - 2024
- Physics
- communication systems
- If two linear antennas having lengths in the ratio 2:3 are emitting radiations of wavelengths in the ratio 8:9, then the ratio of effective powers radiated by them are in the ratio:
- TS EAMCET - 2024
- Physics
- communication systems
- A \(4 \times 1\) multiplexer is used to multiplex 3 signals \(\{A, B, C\}\) with highest frequency components \(\{250 \text{ Hz}, 100 \text{ Hz}, 600 \text{ Hz}\}\) respectively. Each channel is uniformly sampled at a constant rate with the help of a channel selector clock (\(F_{\text{sel}}\)). The input channels \(\{I_1, I_2, I_3, I_4\}\) of the multiplexer are connected to the signals as \(\{A, C, B, C\}\) respectively. What is the minimum value for \(F_{\text{sel}}\) in order to recover the signals from their samples?
- TANCET - 2024
- Electronics and Communication Engineering
- communication systems
Questions Asked in KEAM exam
- Let
\[ f(x) = \begin{cases} x\left( \frac{\pi}{2} + x \right), & \text{if } x \geq 0 \\ x\left( \frac{\pi}{2} - x \right), & \text{if } x < 0 \end{cases} \]
Then \( f'(-4) \) is equal to:- KEAM - 2024
- introduction to three dimensional geometry
If \( f'(x) = 4x\cos^2(x) \sin\left(\frac{x}{4}\right) \), then \( \lim_{x \to 0} \frac{f(\pi + x) - f(\pi)}{x} \) is equal to:
- KEAM - 2024
- introduction to three dimensional geometry
Let \( f(x) = \frac{x^2 + 40}{7x} \), \( x \neq 0 \), \( x \in [4,5] \). The value of \( c \) in \( [4,5] \) at which \( f'(c) = -\frac{1}{7} \) is equal to:
- KEAM - 2024
- Magnitude and Directions of a Vector
The general solution of the differential equation \( \frac{dy}{dx} = xy - 2x - 2y + 4 \) is:
- KEAM - 2024
- Magnitude and Directions of a Vector
- Evaluate the integral:
\[ \int \frac{4x \cos \left( \sqrt{4x^2 + 7} \right)}{\sqrt{4x^2 + 7}} \, dx \]
- KEAM - 2024
- Integral Calculus
Concepts Used:
Communication Systems
A system that describes the information exchange between two points is called the communication system. The transmission and reception process of information is called communication. The major elements of communication are such as:
- The Transmitter of information
- Channel or medium of communication
- The Receiver of information
Examples Of Communication Systems:
The following are the examples of communication systems:
- Internet
- Public Switched Telephone network
- Intranet and Extranet
- Television
Types Of Communication Systems:
Turning on Signal specification or technology, the communication system is categorized as follows:
- Analog technology communicates data as electronic signals of differing frequencies or amplitude. For instance Broadcast and telephone transmission.
- In Digital technology, the data are created and processed in two states: High (represented as 1) and Low (represented as 0). Also this technology stores and transmits data in the form of 1's and 0's.
Elements of a Communication System:
