At a given frequency, the storage modulus \( G' \) and loss modulus \( G'' \) of four biomaterials are shown in the table below. Which of the following option(s) is/are CORRECT?
Two designs A and B, shown in the figure, are proposed for a thin-walled closed section that is expected to carry only torque. Both A and B have a semi-circular nose, and are made of the same material with a wall thickness of 1 mm. With strength as the only criterion for failure, the ratio of maximum torque that B can support to the maximum torque that A can support is ________ (rounded off to two decimal places).
A 1 m long rod of 1 cm × 1 cm cross section is subjected to an axial tensile force of 35 kN. The Young’s modulus of the material is 70 GPa. The cross-section of the deformed rod is 0.998 cm × 0.998 cm. The Poisson’s ratio of the material is __________ (rounded off to one decimal place).
A 1 m long rod is to be designed to support an axial tensile load \( P \) (\( P >> \) weight of the rod). The material for the rod is to be chosen from one of the four provided in the table. Using strength-based failure criterion for design, which material results in the lowest weight of the rod?
Given Properties Properties: