Question:
Simplified form of the Boolean function:
\[
F(P, Q, R, S) = \overline{P}\overline{Q}R + \overline{P}QS + PQ\overline{R}S
\]
is:
Simplified form of the Boolean function:
\[
F(P, Q, R, S) = \overline{P}\overline{Q}R + \overline{P}QS + PQ\overline{R}S
\]
is:
Show Hint
Apply Boolean laws systematically for simplification: distribution, combination, and elimination.
Updated On: Jan 23, 2025
- \( \overline{P}S + \overline{Q}\overline{S} \)
- \( \overline{P}\overline{Q} + \overline{Q}\overline{S} \)
- \( \overline{P}Q + R\overline{S} \)
- \( P\overline{S} + Q\overline{R} \)
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
N/A
Was this answer helpful?
0
0
Top Questions on Miscellaneous
- Find the wavelength in (nm) of incident radiation where the work function is 4.12 eV and the stopping potential is 4V. Given that \( h \nu = 1242 \, \text{eV} \cdot \text{nm} \).
- JEE Main - 2025
- Physics
- Miscellaneous
- If \( A \) and \( B \) are binomial coefficients of the 30\(^\text{th}\) and 12\(^\text{th}\) terms of the binomial expansion \( (1 + x)^{2n-1} \), and \( 2A = 5B \), then the value of \( n \) is
- JEE Main - 2025
- Mathematics
- Miscellaneous
- If \( 7 = 5 + \frac{1}{7}(5 + \alpha) + \frac{1}{7^2}(5 + 2\alpha) + \cdots \infty \text{ terms}, \) then \( \alpha \) is equal to
- JEE Main - 2025
- Mathematics
- Miscellaneous
- Consider the following reaction:
\[ \text{S(s)} + \frac{3}{2} \text{O}_2 \text{(g)} \to \text{SO}_3 \text{(g)} + 2x \text{ K} \] \[ \text{SO}_2 \text{(g)} + \frac{1}{2} \text{O}_2 \text{(g)} \to \text{SO}_3 \text{(g)} + y \text{ K} \] Calculate \( \Delta H \) for the following reaction (K):
\[ \text{S(s)} + \text{O}_2 \text{(g)} \to \text{SO}_2 \text{(g)} \]- JEE Main - 2025
- Chemistry
- Miscellaneous
- When ethane-1,2-diamine is progressively added to aqueous solution of Nickel (II) chloride, the sequence of colour change observed will be:
- JEE Main - 2025
- Chemistry
- Miscellaneous
View More Questions
Questions Asked in GATE EE exam
- A single-phase full-controlled thyristor converter bridge is used for regenerative braking of a separately excited DC motor with the following specifications: Rated armature voltage = \( 210 \, \text{V} \), Rated armature current = \( 10 \, \text{A} \), Rated speed = \( 1200 \, \text{rpm} \), Armature resistance = \( 1 \, \Omega \), Input to the converter bridge = \( 240 \, \text{V at 50 Hz} \). Assume that the motor is running at \( 600 \, \text{rpm} \) and the armature terminals of the motor are suitably reversed for regenerative braking. If the armature current of the motor is to be maintained at the rated value, the triggering angle of the converter bridge in degrees should be (rounded off to 2 decimal places).
\begin{tabular}{|l|l|} \hline Parameter & Value
\hline Rated armature voltage & 210 V
\hline Rated armature current & 10 A
\hline Rated speed & 1200 rpm
\hline Armature resistance & 1 $\Omega$
\hline Input to the converter bridge & 240 V at 50 Hz
\hline \end{tabular}
The armature of the DC motor is fed from the fullcontrolled bridge and the field current is kept constant.- GATE EE - 2024
- Current
- A single-phase half-controlled bridge converter supplies an inductive load with ripple-free load current. The triggering angle of the converter is \( 60^\circ \). The ratio of the rms value of the fundamental component of the input current to the rms value of the total input current of the bridge is (rounded off to 3 decimal places).
- GATE EE - 2024
- Current
- In the DC-DC converter shown in the figure, the current through the inductor is continuous. The switching frequency is \( 500 \, \text{Hz} \). The voltage (\( V_o \)) across the load is assumed to be constant and ripple-free. The peak inductor current in amperes is (rounded off to the nearest integer).
\includegraphics[width=0.5\linewidth]{64.png}- GATE EE - 2024
- Current
- A single-phase full bridge voltage source inverter (VSI) feeds a purely inductive load. The inverter output voltage is a square wave in \( 180^\circ \) conduction mode. The fundamental frequency of the output voltage is \( 50 \, \text{Hz} \). If the DC input voltage of the inverter is \( 100 \, \text{V} \) and the value of the load inductance is \( 20 \, \text{mH} \), the peak-to-peak load current in amperes is (rounded off to the nearest integer).
- A difference amplifier is shown in the figure. Assume the op-amp to be ideal. The CMRR (in dB) of the difference amplifier is (rounded off to 2 decimal places).
\includegraphics[width=0.5\linewidth]{61.png}- GATE EE - 2024
- Current
View More Questions